As an Amazon Associate I earn from qualifying purchases.
Ade Advanced Optics #ad - Powered by a lithium CR2032 batteryIncluded. This green dot comes with a picatinny mounting base. Lenses are precision ground and polished to exacting geometries to virtually eliminate parallax and to provide a very clear, crisp sight picture.
Any plate made for those brands also fits this sight. We have made it more durable to withstand recoil and improved the ability to hold zero.
Multi Illumination Settings. It is also compatible to optics Ready pistols such as Glock MOS, Springfield OSP,. Fully windage and elevation adjustable and lockable; Unlimited Eye Relief. Designed in Oregon. It is also compatible with varies handgun mounting plates that replace rear sight dovetail. We have made several improvements since it's initial release in 2016.
Ade Advanced Optics #ad - Ip67 waterproof. Press and hold the dowN switch for 3 seconds to manually turn on/off the power. Better yet, the same led projects both reticles, a 2 moa dot only, so no re-zeroing is necessary. The additional features that the pRO series includes are Motion Activated System, IP67 Waterproof, and Multi Reticle Technology.
Operates with a single CR1632 battery. Does not fit optic plate/cut for rmr, tool, removeable picatinny plate with two screws, no need to Remove the sight to change the Battery.
Press and hold the UP switch for 3 seconds to change reticle. The lens is coated with multi-coating to eliminate glare and provide a high level of performance in low light. 1. 75" length x1. 25" width x1. 15" height. Ade is releasing the 2023 pro series for ade rd3-0122016-present delta red dot called delta prod3-012PRO.
Ade Advanced Optics #ad - While raptor is turned on, the red dot illumination goes to sleep after five minutes of inactivity, but when any motion or vibration is detected, it instantly switches on illumination at the previous brightness setting.
Dimension 1. 47x1x1. 1 inches. This red dot does noT comes with any other optic plate to mount on an specific pistol. 1-10 levels of brightness intensity. Shockproof/Fogproof/RainProof. The raptor has motion-on/wake-sleep technology.
Operates with a single cr2032 batteryincluded. When the unit is powered off, the motion sensor is turned off too. Since it has a motion sensor to go to sleep, users do not really need to power it off. Comes with a picatinny mounting plate and a pair of screws. Battery life is up to 50000 on low and 500 on brightest setting. 2 moa red dot. Weight 1.
Ade Advanced Optics #ad - Lenses are precision ground and polished to exacting geometries to virtually eliminate parallax and to provide a very clear, crisp sight picture. Any plate made for those brands also fits this sight.
We have made it more durable to withstand recoil and improved the ability to hold zero. Fully windage and elevation adjustable and lockable; Unlimited Eye Relief. This red dot comes with a picatinny mounting base.
Waterproof/shock/fog resistant. Powered by a lithium CR2032 batteryIncluded. It is also compatible with varies handgun mounting plates that replace rear sight dovetail. We have made several improvements since it's initial release in 2014. 5 illumination Settings. Designed in Oregon. It is also compatible to optics Ready pistols such as Glock MOS, Springfield OSP,.
Ade Advanced Optics #ad - Unlimited eye relief, polished/coated lenses, 2 moa red dot, parallax free. Manual power switch at rear end. Led light emitting diode. Ade rd3-002 red dot is the entry level red dot that comes with a built-in/non removeable picatinny base.
It can only be mounted on the pistols that has a picatinny rail on top. Anodized aluminum bodY. Rd3-002 is not recommended for heavy recoil firearm.
It does not works with pistols that does NOT has a picatinny rail on top. Fully multi-coated: multiple anti-reflective coatings on all air-to-glass surfaces increase light. The build-in picatinny mount can not be removed and replace with a handgun mounting plate. Off/low/High. Only weight 1. 9oz with battery installed.
Ade Advanced Optics #ad - Powered by a lithium CR2032 battery. Comes with an removable picatinny mounting base to attach to any thing with piatinny rail. However the front switch of the sight needs to trim down 2mm depends on exact pistol model if the pistol's pre-cut is very short.
It also fits canik using Canik provided mount marked for Doctor/Venom type red dot. Multi Illumination Settings. Powered by a lithium CR2032 batteryIncluded.
This huracan green dot sight fits directly to optics ready pistols that does not need to remove rear sight such as Glock MOS, Springfield OSP. Ade rd3 006, rd3 012, insight, burris fastfire, meopta, rd3 009, rd3 015 are designed to fit the slide/footprint of plate made for Vortex Venom, docter, rd3 013, Eotech MRDS. Any plate made for those brands also fits this sight.
Ade Advanced Optics #ad - The removeable weather shield protects the sight from moisture and provides a clearer sight picture during inclement weather. Ade rd3-006, rd3-009, rd3-012, rd3-013 fit optic cut/optic plate that is compatible with Doctor/Vortex Venom/Viper/Burris Fastfire footprint.
It does not sit into the optic cut. The overall length is longer, typically the plates replacing the rear sight. 3. 5moa red dot. Once installed the weather shield will protect from rain or snow and will stay attached even when mounted on a handgun.
Multi Illumination Settings. Ade is releasing the 2023 pro series that are sensor activated/awake for ade rd3 series fits a varieties of popular footprint on the market. User also has the option to manually turn the red dot power off to disable the Motion Activated System. Powered by a lithium CR2032.
Ade Advanced Optics #ad - Ade makes the red dot to accept the industrial standard footprint. Please ask the pistol manufacture what screw specs they used on the hole and ask them to provide the screw. Hard coated aircraft aluminum and multi-coated glass.
Designed to fit canik elite tp9 sc, s&w mp9 ez, ruger max-9, s&w m&w shield 2.0 optics ready, s&p shield plus performance center, sig p365x/p365xl/p365xl spectre comp, canik mete sfx, canik mete sft, springfield Hellcat OSP, glock 43x mos/48 mosnot compatible with regular glock 43x/48 that are not MOS, Walther PPS M2 Optics Ready, Girsan MC1911SC Ultimate or any pistol/mounting plate/slide with RMS/RMSC screw pattern/footprint.
Comes with screws for several optics Ready handguns. 4moa, weight approximately 17. 6 grames062oz, Length1. 6" x Width. 92" x Height. 93". Does not comes with any mounting plate such as picatinny mount or plate made for a specific handgun. With our advanced technology the sight only draws approximate 700 microampere powers to give a very long battery life. For the rear of part of the red dot to become a back up iron sight.
Ade Advanced Optics #ad - Top load system, no need to Remove the sight to change the Battery. 6 moa dot. Red dot has multi brightness level with one adjustment button. Every time you turn on the dot it stays the same brightness level last time it was turned off.
Shockproof, fogproof and waterproof for 30 minutes under 4ft water. Feature 1 M. O. A wind age and elevation adjustments with audible click. Come with protected cover, adjustment wrench, Adjustment dailing plate, User Manual and Picatinny mounting plate.
Ade Advanced Optics #ad - Powered by a lithium CR2032. Shockproof, fogproof. Ade rd3-020 raptor, rd3-023 valkyrie, rd3-019 stingray fit optic cut/optic plate/ that is compatible with Trijicon RMR/SRO/Holosun 407C/507C footprint. Ade is releasing the 2023 pro series that are sensor activated/awake for ade rd3 series fits a varieties of popular footprint on the market.
Once installed the weather shield will protect from rain or snow and will stay attached even when mounted on a handgun. Ade rd3-018 spike, rd3-021 nuwa fit optic cut/optic plate that is compatible with shield RMS/RMSC/Deltapoint Pro footprint.
3. 5moa red dot. With motion activated system, while the ares pro is turned on, the red dot illumination goes to sleep after five minutes of inactivity, but when any motion or vibration is detected, it instantly switches on illumination at the previous brightness setting. Ade rd3-006, rd3-012, rd3-009, rd3-013 fit optic cut/optic plate that is compatible with Doctor/Vortex Venom/Viper/Burris Fastfire footprint. Fully windage and elevation adjustable and lockable; Unlimited Eye Relief.
1. Ade Advanced Optics
#adAde Advanced Optics RD3-006B Green Dot Micro Mini Reflex Sight For Handgun
#adAny plate made for those brands also fits this sight. We have made it more durable to withstand recoil and improved the ability to hold zero.
More information #ad
3 moa. Ade model rd3-006, rd3-013, rd3-015 are designed to fit the slide/footprint of plate made for Vortex Venom, RD3-012, burris fastfire, Insight, Docter, Meopta, RD3-009, Eotech MRDS. Multi Illumination Settings. It is also compatible to optics Ready pistols such as Glock MOS, Springfield OSP,. Fully windage and elevation adjustable and lockable; Unlimited Eye Relief. Designed in Oregon. It is also compatible with varies handgun mounting plates that replace rear sight dovetail. We have made several improvements since it's initial release in 2016.
| Brand | Ade Advanced Optics #ad |
| Manufacturer | Ade Advanced Optics #ad |
| Weight | 0.4 Pounds |
| Part Number | RD3-006B |
| Model | RD3-006B |
More information #ad
2. Ade Advanced Optics
#adADE 2023 RD3-012-PRO Series Motion Activated Red Dot Sight with Multi Reticle System for Optics Ready Pistol Slide/Cut That is Compatible with Doctor Footprint
#adOperates with a single CR1632 battery. Does not fit optic plate/cut for rmr, tool, removeable picatinny plate with two screws, no need to Remove the sight to change the Battery.
More information #ad
The reticle can be switched between a 32 moa circle with 2 moa dot, or a 32 moa ring only at the push of a button. Fits pistol optic plate/cut that is compatible with Doctor/Vortex Venom/Burris Fastfire footprint. Press and hold the UP switch for 3 seconds to change reticle. The lens is coated with multi-coating to eliminate glare and provide a high level of performance in low light. 1. 75" length x1. 25" width x1. 15" height. Ade is releasing the 2023 pro series for ade rd3-0122016-present delta red dot called delta prod3-012PRO.
| Brand | Ade Advanced Optics #ad |
| Manufacturer | Ade Advanced Optics #ad |
| Part Number | RD3-012-PRO-1 |
| Model | RD3-012PRO-RED |
More information #ad
3. Ade Advanced Optics
#ad6MOA…, Ade Advanced Optics RD3-020 Raptor Red Dot Sight for RMR Footprint/Mounting Plate/Slide/Plate Optics Ready Pistol
#adDimension 1. 47x1x1. 1 inches. This red dot does noT comes with any other optic plate to mount on an specific pistol. 1-10 levels of brightness intensity. Shockproof/Fogproof/RainProof. The raptor has motion-on/wake-sleep technology.
More information #ad
You hold + and - for 2 sec to turn on, and hold both + and - to turn off. Ade rd3-020 rapter is a 2 moa red dot designed to fit any pistol mounting plate/slide/cut that is compatible with RMR/SRO, Holosun 407C/507C/508T footprint red dots. Operates with a single cr2032 batteryincluded. When the unit is powered off, the motion sensor is turned off too. Since it has a motion sensor to go to sleep, users do not really need to power it off. Comes with a picatinny mounting plate and a pair of screws. Battery life is up to 50000 on low and 500 on brightest setting. 2 moa red dot. Weight 1.
| Brand | Ade Advanced Optics #ad |
| Manufacturer | Ade Advanced Optics #ad |
| Weight | 0.07 Pounds |
| Part Number | 020-Rapter |
More information #ad
4. Ade Advanced Optics
#adAde Advanced Optics RD3-009-2 Red Dot Sights
#adWe have made it more durable to withstand recoil and improved the ability to hold zero. Fully windage and elevation adjustable and lockable; Unlimited Eye Relief. This red dot comes with a picatinny mounting base.
More information #ad
5 moa. Ade model rd3-006, rd3-009, rd3-012, meopta, burris fastfire, docter, rd3-015 are designed to fit the slide/footprint of plate made for Vortex Venom, insight, rd3-013, Eotech MRDS. Waterproof/shock/fog resistant. Powered by a lithium CR2032 batteryIncluded. It is also compatible with varies handgun mounting plates that replace rear sight dovetail. We have made several improvements since it's initial release in 2014. 5 illumination Settings. Designed in Oregon. It is also compatible to optics Ready pistols such as Glock MOS, Springfield OSP,.
| Brand | Ade Advanced Optics #ad |
| Manufacturer | Ade Advanced Optics #ad |
| Part Number | RD3-009-2 |
| Model | RD3-009-2 |
More information #ad
5. Ade Advanced Optics
#adAde Advanced Optics RD3-002 Tactical Micro Compact Reflex Red Dot Sight with Integral Weaver-Picatinny Mount for Pistol/Rifle/Shotgun
#adIt can only be mounted on the pistols that has a picatinny rail on top. Anodized aluminum bodY. Rd3-002 is not recommended for heavy recoil firearm.
More information #ad
For red dot sight made to attach pistol mounting plate such as optics ready pistols, RD3-012, RD3-009, please see ADE’s other models such as RD3-006, RD3-013, or mounting plates to replace rear sight, RD3-015. It does not works with pistols that does NOT has a picatinny rail on top. Fully multi-coated: multiple anti-reflective coatings on all air-to-glass surfaces increase light. The build-in picatinny mount can not be removed and replace with a handgun mounting plate. Off/low/High. Only weight 1. 9oz with battery installed.
| Brand | Ade Advanced Optics #ad |
| Manufacturer | Ade Advanced Optics #ad |
| Weight | 0.12 Pounds |
| Part Number | RD3 002 |
More information #ad
6. Ade Advanced Optics
#adAde Advanced Optics RD3-006A Green Dot Micro Mini Reflex Sight for Handgun
#adIt also fits canik using Canik provided mount marked for Doctor/Venom type red dot. Multi Illumination Settings. Powered by a lithium CR2032 batteryIncluded.
More information #ad
It is also compatible with varies handgun mounting plates that replace rear sight dovetail. Fully windage and elevation adjustable and lockable; Unlimited Eye Relief. Fully windage and elevation adjustable and lockable; Unlimited Eye Relief. This huracan green dot sight fits directly to optics ready pistols that does not need to remove rear sight such as Glock MOS, Springfield OSP. Ade rd3 006, rd3 012, insight, burris fastfire, meopta, rd3 009, rd3 015 are designed to fit the slide/footprint of plate made for Vortex Venom, docter, rd3 013, Eotech MRDS. Any plate made for those brands also fits this sight.
| Brand | Ade Advanced Optics #ad |
| Manufacturer | Ade Advanced Optics #ad |
| Weight | 0.4 Pounds |
| Part Number | rd3-006A |
| Model | rd3-006A |
More information #ad
7. Ade Advanced Optics
#adADE RD3-028-P ARES PRO MOTION AWAKE Red Dot with 3.5 MOA Dot and Weather Shield System for Optics Ready Pistol/Optic Plate that is compatible with Doctor/Vortex Venom/Burris Fastfire Footprint/pattern
#adIt does not sit into the optic cut. The overall length is longer, typically the plates replacing the rear sight. 3. 5moa red dot. Once installed the weather shield will protect from rain or snow and will stay attached even when mounted on a handgun.
More information #ad
1. 84" length x1. 30" width x1. 15" height. Side battery load system, no need to Remove the sight to change the Battery. Ade rd3-018 spike, rd3-021 nuwa fit optic cut/optic plate that is compatible with shield RMS/RMSC/Deltapoint Pro footprint. Multi Illumination Settings. Ade is releasing the 2023 pro series that are sensor activated/awake for ade rd3 series fits a varieties of popular footprint on the market. User also has the option to manually turn the red dot power off to disable the Motion Activated System. Powered by a lithium CR2032.
| Brand | Ade Advanced Optics #ad |
| Manufacturer | Ade Advanced Optics #ad |
| Part Number | RD3-028 ARES |
| Model | RD3-028 ARES |
More information #ad
8. Ade Advanced Optics
#adP365XL Spectre Comp and Canik TP9 Elite SC, Ade Advanced Optics RD3-018-SC Spike Micro Red Dot Sight for Springfield Hellcat OSP/PRO
#adDesigned to fit canik elite tp9 sc, s&w mp9 ez, ruger max-9, s&w m&w shield 2.0 optics ready, s&p shield plus performance center, sig p365x/p365xl/p365xl spectre comp, canik mete sfx, canik mete sft, springfield Hellcat OSP, glock 43x mos/48 mosnot compatible with regular glock 43x/48 that are not MOS, Walther PPS M2 Optics Ready, Girsan MC1911SC Ultimate or any pistol/mounting plate/slide with RMS/RMSC screw pattern/footprint.
More information #ad
Comes with screws for several optics Ready handguns. 4moa, weight approximately 17. 6 grames062oz, Length1. 6" x Width. 92" x Height. 93". Does not comes with any mounting plate such as picatinny mount or plate made for a specific handgun. With our advanced technology the sight only draws approximate 700 microampere powers to give a very long battery life. For the rear of part of the red dot to become a back up iron sight.
| Brand | Ade Advanced Optics #ad |
| Manufacturer | Ade Advanced Optics #ad |
| Weight | 0.04 Pounds |
| Part Number | SPIKE-SC |
More information #ad
9. Ade Advanced Optics
#adAde Advanced Optics rd3-012 6MOA Red Dot Micro Mini Reflex Sight for Handgun
#adShockproof, fogproof and waterproof for 30 minutes under 4ft water. Feature 1 M. O. A wind age and elevation adjustments with audible click. Come with protected cover, adjustment wrench, Adjustment dailing plate, User Manual and Picatinny mounting plate.
More information #ad
Promotes rapid target acquisition while providing a precise point of aim; getting shots down range and on target fast. Additional mounting plates for hunguns sells separately. The red dot is compatible with ade handgun mounts for glock barreta hk ups SW MP SIG P226 Springfield Ruger LC9 LC9s LC380 SR9 SR22 SR40 SR45. 1. 75" length x1. 25" width x1. 15" height.| Brand | Ade Advanced Optics #ad |
| Manufacturer | Ade Advanced Optics #ad |
| Part Number | rd3-012 |
| Model | rd3-012 |
More information #ad
10. Ade Advanced Optics
#adAde Advanced Optics ARES RD3-028 PRO Motion Activated 3.5MOA Red Dot Mini Reflex Sight with Weather Shield for Handgun
#adOnce installed the weather shield will protect from rain or snow and will stay attached even when mounted on a handgun. Ade rd3-018 spike, rd3-021 nuwa fit optic cut/optic plate that is compatible with shield RMS/RMSC/Deltapoint Pro footprint.
More information #ad
The removeable weather shield protects the sight from moisture and provides a clearer sight picture during inclement weather. 1. 75" length x1. 25" width x1. 15" height. 3. 5moa red dot. With motion activated system, while the ares pro is turned on, the red dot illumination goes to sleep after five minutes of inactivity, but when any motion or vibration is detected, it instantly switches on illumination at the previous brightness setting. Ade rd3-006, rd3-012, rd3-009, rd3-013 fit optic cut/optic plate that is compatible with Doctor/Vortex Venom/Viper/Burris Fastfire footprint. Fully windage and elevation adjustable and lockable; Unlimited Eye Relief.
| Brand | Ade Advanced Optics #ad |
| Manufacturer | Ade Advanced Optics #ad |
| Part Number | RD3-028 |
| Model | RD3-028 |
More information #ad
