with Cooling Fan – Case for The Official Raspberry Pi 7″ Touchscreen Display – SmartiPi Touch 2

#ad
Smarticase #ad - Three faceplate options included. Requires a 5v 2a micro usb power supply if using a Raspberry Pi 2 or 3. Included is a plain faceplate, plain faceplate with camera hole, and building block compatible faceplate with camera hole. All ports, including the HDMI port are accessible. The smartipi touch 2 is a case for the official raspberry Pi display and Raspberry Pi B+, 3B, 2B, 3A+, 3B+, and 4.

It also has a spot for the Official Raspberry Pi camera v1 and v2. Raspberry pi, raspberry Pi camera, and Raspberry Pi display not included. Please be aware the SD card is not accessible when using this case. Included are two flat white cables to connect the Raspberry Pi 7" display and Raspbery Pi camera to the Raspberry Pi board.

with Cooling Fan - Case for The Official Raspberry Pi 7" Touchscreen Display - SmartiPi Touch 2 #ad - A micro usb splitter cable is included to power a Raspberry Pi 2 or 3 and display at the same time. Works with official 7" pi display and raspberry Pi B+, 3B, 2B, 3B+, 3A+, and 4. Works with Raspberry Pi HAT boards. Take off the back door and put on HAT boards to further extend your Raspberry Pi functionality.

The integrated cooling fan will keep your Raspberry Pi nice and cooling to prevent overthrottling. Also included is a usb-c splitter cable that will power a Raspberry Pi 4 and the display at the same time.

More information about Smarticase #ad

Raspberry Pi 7" Touch Screen Display

#ad
Raspberry Pi 7TOUCH #ad - Adapter board is used to power the display and convert the parallel signals from the display to the serial dsi port on the Raspberry Pi. Screen dimensions: 194mm x 110mm x 20mm including standoffs viewable screen size: 155mm x 86mm Screen resolution 800 x 480 pixels 10 finger capacitive touch Connects to the Raspberry Pi board Using a ribbon cable connected to the dsi port.

Note: the display works with all existing Raspberry Pi models, however the mounting holes only Line up with the newer board design of the a+, b+ and Pi 2. This 7" touchscreen display for the Raspberry Pi is perfect for creating portable and embedded projects where a keyboard and Mouse would be in the way.

Raspberry Pi 7" Touch Screen Display #ad - The full color display outputs up to 800 x 480 and features a capacitive touch sensing capable of detecting 10 fingers. Only two connections from the pi to the display are necessary; power from GPIO or USB connection to the DSI port. Kit contents: 7” touchscreen display adapter board dsi ribbon cable 4 x stand-offs and screws 4 x jumper wires technical Specifications 7” Touchscreen display.

Latest version of Raspbian OS required to operate correctly. The adapter board handles power, Signal conversion, and touch input conversion. Kit contents: 7" touchscreen display adapter board DSI ribbon cable 4 x stand-offs and screws 4 x jumper wires.

More information about Raspberry Pi 7TOUCH #ad


Similar products



SmartiPi Touch 2 Back Cover - 35mm

#ad
Smarticase #ad - The adapter board handles power, Signal conversion, and touch input conversion. Kit contents: 7" touchscreen display adapter board DSI ribbon cable 4 x stand-offs and screws 4 x jumper wires. This 7" touchscreen display for the Raspberry Pi is perfect for creating portable and embedded projects where a keyboard and Mouse would be in the way.

The full color display outputs up to 800 x 480 and features a capacitive touch sensing capable of detecting 10 fingers. Only two connections from the pi to the display are necessary; power from GPIO or USB connection to the DSI port. If you want to use this cover with the fan door part of it will need to be removed so it will fit.

SmartiPi Touch 2 Back Cover - 35mm #ad - Creates a 35mm deep cavity behind the SmartiPi Touch 2. It creates a 35mm deep open area behind the SmartiPi Touch 2 in which you can add your own electronics. It is made out of ABS plastic. Includes four mounting screws. There are no mounting holes on the inside of the cover. Made out of ABS plastc. The smartipi touch 2 back cover screws into the four brass threaded insert holes on the back of the SmartiPi Touch 2.

More information about Smarticase #ad


Similar products



15mm - SmartiPi Touch 2 Back Cover

#ad
Smarticase #ad - Includes four mounting screws. Creates a 35mm deep cavity behind the SmartiPi Touch 2. There are no mounting holes on the inside of the cover. Creates a 15mm deep cavity behind the SmartiPi Touch 2. It is made out of ABS plastic. Made out of ABS plastic. Works with SmartiPi Touch 2. It creates a 15mm deep open area behind the SmartiPi Touch 2 in which you can add your own electronics.

Includes four mounting screws. The adapter board handles power, Signal conversion, and touch input conversion. Kit contents: 7" touchscreen display adapter board DSI ribbon cable 4 x stand-offs and screws 4 x jumper wires. The smartipi touch 2 back cover screws into the four brass threaded insert holes on the back of the SmartiPi Touch 2.

15mm - SmartiPi Touch 2 Back Cover #ad - Made out of ABS plastc. Works with the SmartiPi Touch 2. If you want to use this cover with the fan door part of it will need to be removed so it will fit. This 7" touchscreen display for the Raspberry Pi is perfect for creating portable and embedded projects where a keyboard and Mouse would be in the way. The full color display outputs up to 800 x 480 and features a capacitive touch sensing capable of detecting 10 fingers.

Only two connections from the pi to the display are necessary; power from GPIO or USB connection to the DSI port.

More information about Smarticase #ad


Similar products



Raspberry Pi Official 7 Inch Touch Screen for Raspberry Pi 3 Model B and Pi 2

#ad
Raspberry pi MS.004.00000098 #ad - Made out of ABS plastc. The adapter board handles power, Signal conversion, and touch input conversion. Kit contents: 7" touchscreen display adapter board DSI ribbon cable 4 x stand-offs and screws 4 x jumper wires. Rs official 7 inch Touch Screen for Raspberry Pi. The full color display outputs up to 800 x 480 and features a capacitive touch sensing capable of detecting 10 fingers.

Kit contents: 7" touchscreen display adapter Board DSI Ribbon Cable 4 x Stand-offs and Screws 4 x Jumper Wires. Only two connections to the pi are required; power from the Pi's GPIO port and a ribbon cable that connects to the DSI port present on all Raspberry Pi's. Raspberry pi 7 inch display gives users the ability to create all-in-one, integrated projects such as tablets, infotainment systems and embedded projects.

Raspberry Pi Official 7 Inch Touch Screen for Raspberry Pi 3 Model B and Pi 2 #ad - Creates a 15mm deep cavity behind the SmartiPi Touch 2. Turn your raspberry Pi into a touch screen tablet, infotainment system, or standalone device. Make your own 'internet of Things' IoT devices including a visual display. Connects to the raspberry Pi board using a ribbon cable connected to the DSI port. A range of educational software and programs available on the Raspberry Pi will be touch enabled, making learning and programming easier on the Raspberry Pi.

Made out of ABS plastic. Touchscreen drivers with support for 10-finger touch and an on-screen keyboard will be integrated into the latest Raspbian OS for full functionality without a physical keyboard or mouse.

More information about Raspberry pi MS.004.00000098 #ad


Similar products



Raspberry Pi 4 Model B 2019 Quad Core 64 Bit WiFi Bluetooth 4GB

#ad
Raspberry Pi RAS-4-4G #ad - 2. This 7" touchscreen display for the Raspberry Pi is perfect for creating portable and embedded projects where a keyboard and Mouse would be in the way. The full color display outputs up to 800 x 480 and features a capacitive touch sensing capable of detecting 10 fingers. Only two connections from the pi to the display are necessary; power from GPIO or USB connection to the DSI port.

Includes four mounting screws. 0 ports, 2 x usb 2. 0, and poe capability via a separate PoE HAT add-on. Made out of ABS plastc. 11b/g/n/ac wireless laN, Bluetooth 5. The dual-band wireless lan and bluetooth have modular compliance certification, allowing the board to be designed into end products with significantly reduced compliance testing, improving both cost and time to market.

Raspberry Pi 4 Model B 2019 Quad Core 64 Bit WiFi Bluetooth 4GB #ad - 0, gigabit ethernet, USB 3. Broadcom bcm2711, quad-core cortex-a72 arm v8 64-bit soc @ 1. The full color display outputs up to 800 x 480 and features a capacitive touch sensing capable of detecting 10 fingers. Kit contents: 7" touchscreen display adapter Board DSI Ribbon Cable 4 x Stand-offs and Screws 4 x Jumper Wires.

Creates a 15mm deep cavity behind the SmartiPi Touch 2. For the end user, raspberry pi 4 Model B provides desktop performance comparable to entry-level x86 PC systems.

More information about Raspberry Pi RAS-4-4G #ad


Similar products



Raspberry Pi Camera Module V2-8 Megapixel,1080p

#ad
Raspberry Pi RPI-CAM-V2 #ad - The fixed-focus lens can capture 3280 x 2464 pixel images and 1080p30, 720p60 and 640x480p90 video. The raspberry pi camera v2 connects to the CSi connector of your Raspberry Pi via a 15cm long flexible ribbon cable. The full color display outputs up to 800 x 480 and features a capacitive touch sensing capable of detecting 10 fingers.

Kit contents: 7" touchscreen display adapter Board DSI Ribbon Cable 4 x Stand-offs and Screws 4 x Jumper Wires. Includes four mounting screws. 11b/g/n/ac wireless laN, Bluetooth 5. 2-lane mipi dsi/csi ports for camera and display--4-pole stereo audio and composite video port--Micro SD card slot for loading operating system and data storage.

Raspberry Pi Camera Module V2-8 Megapixel,1080p #ad - Broadcom bcm2711, quad-core cortex-a72 arm v8 64-bit soc @ 1. Made out of ABS plastc. 0 ghz ieee 802. Second generation Raspberry Pi Camera Module with Fixed Focus Lens. 2. 0, double-true Gigabit Ethernet. Rs official 7 inch Touch Screen for Raspberry Pi. Works with the SmartiPi Touch 2. It is plug-and-play compatible latest version of the Raspbian operating system making it perfect for time-lapse photography, motion detection, recording video, and security applications.

More information about Raspberry Pi RPI-CAM-V2 #ad


Similar products



CanaKit Raspberry Pi 4 Power Supply USB-C

#ad
CanaKit USB-C #ad - Ul listed. Requires 5. 4 ghz and 5. 2-lane mipi dsi/csi ports for camera and display--4-pole stereo audio and composite video port--Micro SD card slot for loading operating system and data storage. Sony exmor imx219 sensor capable of 4k30, 720P180, 1080P60, 8MP Still.3280 h x 2464 v active Pixel Count. Important note Compatible with Raspberry Pi 4 only.

Made out of ABS plastc. 0 ghz ieee 802. This 7" touchscreen display for the Raspberry Pi is perfect for creating portable and embedded projects where a keyboard and Mouse would be in the way. The full color display outputs up to 800 x 480 and features a capacitive touch sensing capable of detecting 10 fingers.

CanaKit Raspberry Pi 4 Power Supply USB-C #ad - Only two connections from the pi to the display are necessary; power from GPIO or USB connection to the DSI port. Not compatible with raspberry Pi 3 B, B+, A+ or Pi Zero. Includes noise filter for added stability. 0 ports, 2 x usb 2. 2a power supply Highly Recommended. 11b/g/n/ac wireless laN, Bluetooth 5. This canakit power supply incorporates a noise filter to provide the highest power stability.

Includes four mounting screws.

More information about CanaKit USB-C #ad


Similar products



Adjustable Angle - SmartiPi Touch 1 - Case for The Official Raspberry Pi 7" Touchscreen Display

#ad
Smarticase 8541610593 #ad - The case also works with Raspberry Pi HAT boards. The case is made out of strong ABS plastic. This 7" touchscreen display for the Raspberry Pi is perfect for creating portable and embedded projects where a keyboard and Mouse would be in the way. The full color display outputs up to 800 x 480 and features a capacitive touch sensing capable of detecting 10 fingers.

Only two connections from the pi to the display are necessary; power from GPIO or USB connection to the DSI port. 0 ports-2 × micro hdmi ports supporting up to 4Kp60 video resolution. Building block compatible Raspberry Pi camera case that attaches to back included. Creates a 15mm deep cavity behind the SmartiPi Touch 2.

Adjustable Angle - SmartiPi Touch 1 - Case for The Official Raspberry Pi 7" Touchscreen Display #ad - 2 × usb 3. Made out of ABS plastic. 2-lane mipi dsi/csi ports for camera and display--4-pole stereo audio and composite video port--Micro SD card slot for loading operating system and data storage. This case is not compatible with the Raspberry Pi 4 launched in June 2019. The case also has 75mm VESA mounting points on the back.

The case also includes a micro usb splitter cable that you can use to power the display and Raspberry Pi at the same time. Please note that the hdmi port on the Raspberry Pi is not accessible with this SmartiPi Touch case.

More information about Smarticase 8541610593 #ad


Similar products



CanaKit Raspberry Pi 4 4GB Basic Kit 4GB RAM

#ad
CanaKit #ad - 5ghz-4gb lpddr4-2400 sdraM. Important note: Raspberry Pi 4 compatible operating system is required for operation. Creates a 35mm deep cavity behind the SmartiPi Touch 2. Requires 5. Second generation Raspberry Pi Camera Module with Fixed Focus Lens. 2 × usb 3. The adapter board handles power, Signal conversion, and touch input conversion.

Kit contents: 7" touchscreen display adapter board DSI ribbon cable 4 x stand-offs and screws 4 x jumper wires. 0 ghz ieee 802. Includes four mounting screws. Canakit usb-c piswitch On/Off Power Switch. Includes noise filter for added stability. Not compatible with the Raspberry Pi 4. 3. 5a usb-c power supply specially designed and tested for the Raspberry Pi 4.

CanaKit Raspberry Pi 4 4GB Basic Kit 4GB RAM #ad - In addition to the canakit usb-c power supply, this kit includes a set of 3 Aluminum Heat Sinks to keep the Raspberry Pi 4 cool as well as the Cana Kit Quick Start Guide. The raspberry pi 4 provides desktop performance comparable to entry-level x86 PC systems. 2. Due to the higher power requirements, the Raspberry Pi 4 requires a 3.

More information about CanaKit #ad


Similar products



Raspberry SC15184 Pi 4 Model B 2019 Quad Core 64 Bit WiFi Bluetooth 2GB

#ad
Raspberry Pi SC15184 #ad - 3. 5a usb-c power supply specially designed and tested for the Raspberry Pi 4. Building block compatible Raspberry Pi camera case that attaches to back included. Canakit usb-c piswitch On/Off Power Switch. 11b/g/n/ac wireless LAN, Bluetooth 5. 4/5. 0, and poe capability via a separate PoE HAT add-on. Canakit 3. 5a usb-c power supply with noise Filter UL Listed specially designed for the Raspberry Pi 4 5-foot cable.

Raspberry SC15184 Pi 4 Model B 2019 Quad Core 64 Bit WiFi Bluetooth 2GB #ad - Made out of ABS plastc. 18 awg cable. 5ghz. 0 ghz ieee 802. 0, ble. 2. Works with SmartiPi Touch 2. 2 × usb 3. 2 × micro hdmi ports supproting up to 4Kp60 video resolution. 1v, 3a power via usb type c or gpio-not included poe power over ethernet enabled requires PoE HAT-not included This 7" touchscreen display for the Raspberry Pi is perfect for creating portable and embedded projects where a keyboard and Mouse would be in the way.

The full color display outputs up to 800 x 480 and features a capacitive touch sensing capable of detecting 10 fingers. Only two connections from the pi to the display are necessary; power from GPIO or USB connection to the DSI port. 5ft cable Length.

More information about Raspberry Pi SC15184 #ad


Similar products