UCTRONICS 3.5 Inch HDMI TFT LCD Display with Touch Screen, Touch Pen, 3 Heat Sinks for Raspberry Pi 3 Model B+, 3 Mode B,Pi 2 Model B, Pi B+

#ad
UCTRONICS B010601 #ad - With its touch screen and split audio from the HDMI input, and it is a replacement for a heavy and bulky HDMI monitor, it is ideal for portable devices and multimedia projects, keyboard and mice. Hdmi input resolution supports 480*320 to 1920*1280 any resolution. When resolution is compressed, the screen display ratio might be changed accordingly.

Too high resolution will cause module power consumption rises. 3. For the male to female ribbon GPIO Cable to connect Raspberry Pi and 3. 5inch touch screen, check ASIN: B07D991KMR. The 3. 5 inch touch screen is the same size as the standard Raspberry Pi model B/B+, and well mates with the Raspberry Pi boards. Refreshes up to 60 frames per second.

UCTRONICS 3.5 Inch HDMI TFT LCD Display with Touch Screen, Touch Pen, 3 Heat Sinks for Raspberry Pi 3 Model B+, 3 Mode B,Pi 2 Model B, Pi B+ #ad - Support plug and play without reboot the Pi. With 3. 5mm stereo audio output. Those resolutions higher than 480*320 will be compressed to 480*320 in LCD display. Supports HDMI audio split. Raspberry pi main board shown in the picture is not included. Display resolution is 480*320

More information about UCTRONICS B010601 #ad

MakerFocus Raspberry Pi 3 Case Protective Case, Raspberry Pi 3.5 inch Display Case, with Mini Cooling Fan Heatsink Kit for Raspberry Pi 3B, 3B+,2B,2B+ Compatible with Raspberry Pi 3.5 inch Display

#ad
Makerfire NA #ad - Raspberry pi 3 case Protective Case, Raspberry Pi 3. 5 inch display case, 2b, enclosure box with mini cooling Fan Heatsink Kit for Raspberry Pi 3B, 3B+, 2B+ Compatible with Raspberry Pi 3.5 inch displaythis protective case is designed specifically for the Raspberry Pi 2 Model B/B+ and Raspberry Pi 3 Model B and 3.

5inch display;it provides the best available protection/accessibility for the Raspberry Pi 2 Model B and Raspberry Pi 3 Model B and 3. 5 inch display. This case is easy to install and has good ventilation, it can install the cooling fan when you have not use the display. There is a gpio open position with this case, easy to pull up and insert the GPIO pins, don't need to open the case.

MakerFocus Raspberry Pi 3 Case Protective Case, Raspberry Pi 3.5 inch Display Case, with Mini Cooling Fan Heatsink Kit for Raspberry Pi 3B, 3B+,2B,2B+ Compatible with Raspberry Pi 3.5 inch Display #ad - It with a compact design, simple and elegant, transparent environmental protection material. Package including:1 * raspberry pi case3 * Heat Sink1 * Mini Cooling Fan with screws Installation instructions video: ★https://drive. Google. Com/file/d/1n6y5fzvx74swwc_hfvo6yhhfe32-4vgi/view; ★https://drive. Google.

Com/open?id=1rx11dieefxeZ3Ig40MzuMXO3-9tdFoo3. Plz note: ★this case is not compatible with 3. 5 inch hdmi tft lcd display, it is designed to RPI 3.

More information about Makerfire NA #ad


Similar products



Element14 Raspberry Pi 3 B+ Motherboard

#ad
Element14 Raspberry Pi 3 Model B+ #ad - Note: the raspberry Pi motherboard and Raspberry Pi 3. 5inch display are not included!!! Bluetooth 4. 2, bluetooth Low Energy. Package contents : - 1x raspberry Pi 3 Model B+ Installation instructions video: ★https://drive. Google. Com/file/d/1n6y5fzvx74swwc_hfvo6yhhfe32-4vgi/view; ★https://drive. Google. Com/open?id=1rx11dieefxeZ3Ig40MzuMXO3-9tdFoo3.

5 amps. To take full advantage of the improved power management on the Raspberry Pi 3 and provide support for even more powerful devices on the USB ports, a 2. New original raspberry Pi 3 Model B+ Built-in Broadcom 1. 5a adapter is required. Plz note: ★this case is not compatible with 3. 5 inch hdmi tft lcd display, it is designed to RPI 3.

Element14 Raspberry Pi 3 B+ Motherboard #ad - 5 inch gpio display, ★The 3. 5 inch screen is not included!!! . 4ghz quad-core 64 bit processor with low energy on-board wi-fi bluetooth and USB Port Built on the latest Broadcom 2837 ARMv8 64 bit processor, Raspberry Pi 3 Model B+ is faster and more powerful than its predecessors. Dual-use: you can use it only on the raspberry pi motherboard, or use it on the Raspberry Pi motherboard and Raspberry Pi 3.

5inch display, Then decide whether to cover the its cover.

More information about Element14 Raspberry Pi 3 Model B+ #ad


Similar products



CanaKit Raspberry Pi 3 B+ B Plus with 2.5A Power Supply UL Listed

#ad
CanaKit NA #ad - Bluetooth 4. 2, bluetooth Low Energy. Dual-use: you can use it only on the raspberry pi motherboard, or use it on the Raspberry Pi motherboard and Raspberry Pi 3. 5inch display, Then decide whether to cover the its cover. Canakit 2. 5a usb power supply with micro usb cable and Noise Filter - Specially designed for the Raspberry Pi 3 B+ UL Listed.

Set of 2 aluminum Heat Sinks. Canakit Quick-Start Guide. Can install mini cooling fan: the case when used without the display screen, Snap-in installation, you can install mini cooling fan, the cooling fan was included in packaging. With gpio open position: there is a gpio open position on this case cover, it can easy to pull up and insert the GPIO pins, when you use it only with Raspberry Pi motherboard, don't need to open the cover.

CanaKit Raspberry Pi 3 B+ B Plus with 2.5A Power Supply UL Listed #ad - Dual band 2. 4ghz and 5ghz ieee 802. 11. B/g/n/ac wireless LAN, Enhanced Ethernet Performance. An exclusive kit from canakit that includes the fastest model of the raspberry Pi family - the Raspberry Pi 3 Model B+ B Plus!The Raspberry Pi 3 Model B+ is the latest production Raspberry Pi 3 featuring a 64-bit quad core processor running at 1.

4 ghz. 802.

More information about CanaKit NA #ad


Similar products



Black - iPazzPort Wireless Mini Handheld Keyboard with Touchpad Mouse Combo for Android TV Box and Raspberry Pi 3 and HTPC and XBMC KP-810-19S

#ad
UNISEN LIMITED KP-810-19S #ad - Bluetooth 4. 2, bluetooth Low Energy. Battery type: AAA batteryNot included in package. Specification: Operating Range: 25 Ft. Note: the raspberry Pi motherboard and Raspberry Pi 3. 5inch display are not included!!! Auto sleep and auto wake mode, after 3 minutes of non-use to conserve battery power. Compatible with android tv box, htpc, XBMC, raspberry Pi, PC, laptop.

Color: Black. You never have to leave the couch. Stored inside the back cover of the keyboard, simply insert the USB receiver into an available USB slot on your device for wireless connection. Dual-use: you can use it only on the raspberry pi motherboard, or use it on the Raspberry Pi motherboard and Raspberry Pi 3.

Black - iPazzPort Wireless Mini Handheld Keyboard with Touchpad Mouse Combo for Android TV Box and Raspberry Pi 3 and HTPC and XBMC KP-810-19S #ad - 5inch display, Then decide whether to cover the its cover. Features: 92 keys, 2. 4ghz wireless Keyboard with Touchpad combo. Set of 2 aluminum Heat Sinks. This case is easy to install and has good ventilation. With cable guide hole: it reserved cable guide hole for the camera, more convenient to use with cameraRpi camera purchase link: https://www.

Amazon. Com/dp/b06xydCN5N.

More information about UNISEN LIMITED KP-810-19S #ad


Similar products



KOOKYE 3.5''Touch Screen Transparent Acrylic Raspberry Pi Case + Cooling Heated Sinks + Screwdriver for Raspberry Pi 2 3 B Board

#ad
KOOKYE ZZHDMI2100 #ad - Set of 2 aluminum Heat Sinks. Sold and serviced by ipazzport, the leading manufacturer of low cost, high quality wireless handheld keyboards with One Year Warranty. Stored inside the back cover of the keyboard, simply insert the USB receiver into an available USB slot on your device for wireless connection.

. 4 usb ports, full hdmi port, 40 gpio pins, Combined 3.5mm audio jack and composite video. Camera interface csi, micro sd card slot now push-pull rather than push-push, Display interface DSI, VideoCore IV 3D graphics core. Includes raspberry pi 3 b+ b plus with 1. 4 ghz 64-bit quad-core processor, 1 GB RAM.

KOOKYE 3.5''Touch Screen Transparent Acrylic Raspberry Pi Case + Cooling Heated Sinks + Screwdriver for Raspberry Pi 2 3 B Board #ad - This case is easy to install and has good ventilation. With cable guide hole: it reserved cable guide hole for the camera, more convenient to use with cameraRpi camera purchase link: https://www. Amazon. Com/dp/b06xydCN5N. 1. 4ghz 64-bit quad-core armv8 CPU, 1 GB RAM. Specification: Name: Raspberry pi 3 and 3. 5'' lcd screen case material: acrylic Color: transparent Dimension: 4 * 2.

More information about KOOKYE ZZHDMI2100 #ad


Similar products



CanaKit 5V 2.5A Raspberry Pi 3 B+ Power Supply / Adapter UL Listed

#ad
Cana Kit Corporation DCAR-RSP-2A5 #ad - Support aaa battery, easy to install and changebattery not provided in package. Can install mini cooling fan: the case when used without the display screen, you can install mini cooling fan, Snap-in installation, the cooling fan was included in packaging. With gpio open position: there is a gpio open position on this case cover, it can easy to pull up and insert the GPIO pins, when you use it only with Raspberry Pi motherboard, don't need to open the cover.

Plz note: ★this case is not compatible with 3. 5 inch hdmi tft lcd display, it is designed to RPI 3. 5 inch gpio display, ★The 3. 5 inch screen is not included!!!4 usb ports, full hdmi port, 40 gpio pins, Combined 3.5mm audio jack and composite video. Camera interface csi, display interface DSI, micro sd card slot now push-pull rather than push-push, VideoCore IV 3D graphics core.

CanaKit 5V 2.5A Raspberry Pi 3 B+ Power Supply / Adapter UL Listed #ad - Includes raspberry pi 3 b+ b plus with 1. 4 ghz 64-bit quad-core processor, 1 GB RAM. 2. 5a is now a requirement for the Raspberry Pi 3. Bluetooth 4.

More information about Cana Kit Corporation DCAR-RSP-2A5 #ad


Similar products



Raspberry Pi 7" Touch Screen Display

#ad
Raspberry Pi 7TOUCH #ad - 5 feet cord length. By adopting srews to assemble, it could avoid broken under overstrained. Thoughful stripes design-- there is two fixed stripes in middle of case to protect the raspberry pi touch screen without distortion under force and pressure. Tested with all versions of the Raspberry Pi including the Pi 2 and Pi 3.

Raspberry Pi 7" Touch Screen Display #ad - No need to keep a full sized keyboard and mouse connected. Connects to your device via included 2. 4 ghz usb receiver. Installation instructions video: ★https://drive. Google. Com/file/d/1n6y5fzvx74swwc_hfvo6yhhfe32-4vgi/view; ★https://drive. Google. Com/open?id=1rx11dieefxeZ3Ig40MzuMXO3-9tdFoo3. Screen dimensions: 194mm x 110mm x 20mm including standoffs viewable screen size: 155mm x 86mm Screen resolution 800 x 480 pixels 10 finger capacitive touch Connects to the Raspberry Pi board Using a ribbon cable connected to the dsi port.

Latest version of Raspbian OS required to operate correctly. Bluetooth 4. 2, bluetooth Low Energy. Plz note: ★this case is not compatible with 3. 5 inch hdmi tft lcd display, it is designed to RPI 3.

More information about Raspberry Pi 7TOUCH #ad


Similar products



Miuzei Raspberry Pi 3B+ Battery Pack Expansion Board, UPS Battery Pack with Acrylic Case for Raspberry Pi 3B+, 3B, 2B

#ad
Miuzei MC12-1 #ad - Micro USB plug. The adapter board handles power, Signal conversion, and touch input conversion. Kit contents: 7" touchscreen display adapter board DSI ribbon cable 4 x stand-offs and screws 4 x jumper wires. That's why the raspberry pi will turn off after 24 hours when the AC power adapter connect the battery to power the Raspberry Pi.

. Dual-use: you can use it only on the raspberry pi motherboard, or use it on the Raspberry Pi motherboard and Raspberry Pi 3. 5inch display, Then decide whether to cover the its cover. Canakit 2. 5a usb power supply with micro usb cable and Noise Filter - Specially designed for the Raspberry Pi 3 B+ UL Listed.

Miuzei Raspberry Pi 3B+ Battery Pack Expansion Board, UPS Battery Pack with Acrylic Case for Raspberry Pi 3B+, 3B, 2B #ad - Features: battery capacity: 3800mah Maximum output current: 2A Output voltage: 5V ± 01v standard charging current/voltage: 1. 0a/5. 0v cut-off voltage of fully charging: 4. 18v - 4. 2v package includes: 1 x rpi battery expansion board with lithium battery 4 x Copper standoff 4 x Screws 4 x Nuts 2 x layer Acrylic Board 1 x Micro USB cable Installation instructions video: ★https://drive.

Google. Com/file/d/1n6y5fzvx74swwc_hfvo6yhhfe32-4vgi/view; ★https://drive.

More information about Miuzei MC12-1 #ad


Similar products



Arducam 5 Megapixels 1080p Sensor OV5647 Mini Camera Video Module for Raspberry Pi Model A/B/B+, Pi 2 and Raspberry Pi 3,3B+, Pi 4

#ad
Arducam B0033 #ad - Note: the raspberry Pi motherboard and Raspberry Pi 3. 5inch display are not included!!! The camera is connected to the bcm2835/bcm2836 processor on the Pi via the CSI bus, a higher bandwidth link which carries pixel data from the camera back to the processor. Support aaa battery, easy to install and changebattery not provided in package.

Features: angle of view: 54 x 41 degrees Field of View: 2. 0 x 1. 33 m at 2 m full-frame slr lens equivalent: 35 mm fixed focus: 1 m to infinity max frame rate: 30fps 15 cm flat ribbon cable to 15-pin mipi camera serial interface csi connector application: Cellular phones, PDAs, Toys Other battery-powered products Can be used in all Raspberry Pi platforms Package including: 1pcs 5MP Mini Camera OV5647 Sensor 1080p 720p video for Raspberry Pi official Board 1pcs 15cm 15pin FPC cable NOTE:Raspberry Pi Type B Development Board is not included Installation instructions video: ★https://drive.

Arducam 5 Megapixels 1080p Sensor OV5647 Mini Camera Video Module for Raspberry Pi Model A/B/B+, Pi 2 and Raspberry Pi 3,3B+, Pi 4 #ad - Google. Com/file/d/1n6y5fzvx74swwc_hfvo6yhhfe32-4vgi/view; ★https://drive. Google. Com/open?id=1rx11dieefxeZ3Ig40MzuMXO3-9tdFoo3. With battery indicator leds show the current battery power and easy to turn ON/OFF the battery with the power switch on the battery board. And you need charge the battery separately for some hours first when the battery failure and then use it for raspberry pi again.

The battery only using a micro USB power supply that this would not provide full power to the PI.

More information about Arducam B0033 #ad


Similar products



Battery Pack for Raspberry Pi 3 B+, 4000mAh, Suction

#ad
Yapears 5647469919 #ad - No need to keep a full sized keyboard and mouse connected. Connects to your device via included 2. 4 ghz usb receiver. 802. 11n wireless lan, 10/100Mbps Lan Speed. Bluetooth 4. 2, bluetooth Low Energy. Stored inside the back cover of the keyboard, simply insert the USB receiver into an available USB slot on your device for wireless connection.

By adopting srews to assemble, it could avoid broken under overstrained. Thoughful stripes design-- there is two fixed stripes in middle of case to protect the raspberry pi touch screen without distortion under force and pressure. Tested with all versions of the Raspberry Pi including the Pi 2 and Pi 3. This case is easy to install and has good ventilation.

Battery Pack for Raspberry Pi 3 B+, 4000mAh, Suction #ad - With cable guide hole: it reserved cable guide hole for the camera, more convenient to use with cameraRpi camera purchase link: https://www. Amazon. Com/dp/b06xydCN5N. 1. 4ghz 64-bit quad-core armv8 CPU, 1 GB RAM. Ul listed. Integral IR filter.

More information about Yapears 5647469919 #ad


Similar products