Raspberry Pi 3 Model B Motherboard

#ad
RASPBERRY PI RASPBERRYPI3-MODB-1GB #ad - Please see the product packaging. Technical specifications: - broadcom bcm2837 64bit ARMv8 QUAD Core 64bit Processor powered Single Board Computer running at 1. 2ghz - 1gb ram - bcm43143 wifi on board - bluetooth low energy ble on board - 40pin extended gpio - 4 x usb2 ports - 4 pole stereo output and composite video port - Full size HDMI - CSI camera port for connecting the Raspberry Pi camera - DSI display port for connecting the Raspberry Pi touch screen display - MicroSD port for loading your operating system and storing data - Upgraded switched Micro USB power source now supports up to 2.

5 amps. 802. 11n wireless lan, 10/100Mbps Lan Speed. Built on the latest broadcom 2837 armv8 64 bit processor the Raspberry Pi 3 Model B is faster and more powerful than its predecessors. 1. 2ghz 64-bit quad-core armv8 CPU, 1 GB RAM. Bluetooth 4. 1, bluetooth Low Energy. 4 usb ports, 40 gpio pins, full hdmi port, Combined 3.

Raspberry Pi 3 Model B Motherboard #ad - 5mm audio jack and composite video. Camera interface csi, display interface dsI, Micro SD card slot now push-pull rather than push-push, VideoCore IV 3D graphics core.

More information about RASPBERRY PI RASPBERRYPI3-MODB-1GB #ad

Stratux AHRS Sensors and Fan Controller/Raspberry Pi MPU9250+BMP280

#ad
Stratux NA #ad - Mpu-9250, bmp280, and fan speed controller. Raspberry Pi pinout. No soldering needed. Invensense mpu-9250 and Bosch BMP280 Onboard fan speed controller circuit.

More information about Stratux NA #ad


Similar products



Stratux Case with Fan, White ABS

#ad
Stratux 4328429874 #ad - Simplified assembly and all tools required included. Place stratux inside and secure six screws. Does not include raspberry Pi, SDRs, GPS, or battery. Stratux case. Raspberry Pi pinout. No soldering needed. Invensense mpu-9250 and Bosch BMP280 Onboard fan speed controller circuit. Includes case, 3 cFM brushless fan, and screws and assembly tools.

For use with Raspberry Pi 2 and 3. Sized for use with "nano" sized sdrs and a Vk-172/GPYes or Vk-162 GPS. Fits stratux AHRS board. Injection molded white ABS with flame retardant.

More information about Stratux 4328429874 #ad


Similar products



Stratux 1090ES & UAT - Radios Low Power v2 and High Gain Antennas

#ad
Stratux 4330082217 #ad - Raspberry Pi pinout. No soldering needed. Invensense mpu-9250 and Bosch BMP280 Onboard fan speed controller circuit. Includes case, 3 cFM brushless fan, and screws and assembly tools. For use with Raspberry Pi 2 and 3. Sized for use with "nano" sized sdrs and a Vk-172/GPYes or Vk-162 GPS. Fits stratux AHRS board. Injection molded white ABS with flame retardant.

Plug and play with and supported by Stratux project. Includes two SDRs each programmed for tuned antennas. R820t2 + rtl2832u. High gain antennas. 30% lower power consumption and optimized heat dissipation. Includes 1090 mhz and 978 mhz tuned high gain antennas with MCX-SMA pigtails. Two "nano" sized sdrs, 1x pre-programmed for Stratux 1090ES, 1x pre-programmed for Stratux 978 MHz/UAT.

More information about Stratux 4330082217 #ad


Similar products



Stratux Case Suction Mount

#ad
Stratux 4350459869 #ad - Raspberry Pi pinout. No soldering needed. Invensense mpu-9250 and Bosch BMP280 Onboard fan speed controller circuit. Includes case, 3 cFM brushless fan, and screws and assembly tools. For use with Raspberry Pi 2 and 3. Sized for use with "nano" sized sdrs and a Vk-172/GPYes or Vk-162 GPS. Fits stratux AHRS board. Injection molded white ABS with flame retardant.

Plug and play with and supported by Stratux project. Includes two SDRs each programmed for tuned antennas. R820t2 + rtl2832u. High gain antennas. 30% lower power consumption and optimized heat dissipation. Designed to face GPS antenna outwards. Four included suction cups make for easy mounting on curved windows. Fits the stratux "white abs" case.

Stratux Case Suction Mount #ad - Does not fit summiTLINK cases. Designed for use with stratux ABS case for optimal ADS-B and GPS reception.

More information about Stratux 4350459869 #ad


Similar products



CanaKit 5V 2.5A Raspberry Pi 3 B+ Power Supply/Adapter UL Listed

#ad
CanaKit DCAR-RSP-2A5 #ad - This power supply differs from typical standard 5V USB power supplies in the market in that it can deliver a full 2. 5a and still output a voltage well within the USB minimum voltage specifications. It is also ideal for use by anyone over-clocking the Raspberry Pi which causes higher power requirements that a lower power adapter may not be able to supply.

Micro USB plug. Ul listed. 2. 5a is now a requirement for the Raspberry Pi 3. 5-feet cable with integrated noise filter. The canaKit 2. 5a raspberry pi power supply / adapter has been specially designed and tested for the new Raspberry Pi 3 and incorporates an inline noise filter for highest stability and reliable operation.

CanaKit 5V 2.5A Raspberry Pi 3 B+ Power Supply/Adapter UL Listed #ad - The power supply still has about 05a of output power to spare, so even at the maximum current supported by the Raspberry Pi 3, the power supply is not at its absolute maximum. Raspberry Pi pinout. No soldering needed. Invensense mpu-9250 and Bosch BMP280 Onboard fan speed controller circuit. Includes case, 3 cFM brushless fan, and screws and assembly tools.

More information about CanaKit DCAR-RSP-2A5 #ad


Similar products



Stratux Software Card pre-Programmed Micro SD Card - v1.5b1

#ad
Stratux 6486856 #ad - Output: 5v dc / 2. 5a regulated input: 100 - 240VAC. Micro USB plug. Pre-programmed with the latest stable Stratux version v1. 4r5. Just plug into a raspberry pi 3, plug in your SDRs radios, connect your antennas, and you're ready to go. Does not fit summiTLINK cases. Tested with all versions of the Raspberry Pi including the Pi 2, Pi 3 and Pi 3 B+.

. 5-feet cable with integrated noise filter. Pre-programmed with the latest stable Stratux version. Raspberry Pi pinout. No soldering needed. Invensense mpu-9250 and Bosch BMP280 Onboard fan speed controller circuit. Includes case, 3 cFM brushless fan, and screws and assembly tools. For use with Raspberry Pi 2 and 3.

Stratux Software Card pre-Programmed Micro SD Card - v1.5b1 #ad - Sized for use with "nano" sized sdrs and a Vk-172/GPYes or Vk-162 GPS. Fits stratux AHRS board. Injection molded white ABS with flame retardant. Plug and play with and supported by Stratux project. Includes two SDRs each programmed for tuned antennas.

More information about Stratux 6486856 #ad


Similar products



LoveRPi Performance Heatsink Set for Raspberry Pi 3 Model B+ 2 Heatsinks

#ad
LoveRPi LYSB018BGRDVS-ELECTRNCS #ad - For raspberry pi 3 model b, cooling amplification for CPU die area is over 100x! Say goodbye to temperature based performance throttling and maintain consistent maximum performance. Must have for raspberry pi 3: at full load, bcm2837 soc will reach 100°c. Output: 5v dc / 2. 5a regulated input: 100 - 240VAC.

Included parts: large straight-fin heatsink with 3m adhesive for soc small straight-fin heatsink with 3m adhesive for lan chipset supported boards: raspberry pi 3 model b+ raspberry pi 3 Model B Raspberry Pi 2 Model B Additional Boards supported by Large Heatsink: Libre Computer Board ALL-H3-CC Libre Computer Board AML-S905X-CC Libre Computer Board ROC-RK3328-CC Banana Pi M3 Allwinner A83T Orange Pi Boards with Allwinner H2+/H3/H5 Raspberry Pi pinout.

LoveRPi Performance Heatsink Set for Raspberry Pi 3 Model B+ 2 Heatsinks #ad - No soldering needed. Invensense mpu-9250 and Bosch BMP280 Onboard fan speed controller circuit. Includes case, 3 cFM brushless fan, and screws and assembly tools. For use with Raspberry Pi 2 and 3. Sized for use with "nano" sized sdrs and a Vk-172/GPYes or Vk-162 GPS. Fits stratux AHRS board. Injection molded white ABS with flame retardant.

Plug and play with and supported by Stratux project.

More information about LoveRPi LYSB018BGRDVS-ELECTRNCS #ad


Similar products



Radios Low Power v2+v3 and High Gain Antennas - Stratux 1090ES & UAT

#ad
Stratux #ad - Pre-programmed with the latest stable Stratux version v1. 4r5. Just plug into a raspberry pi 3, plug in your SDRs radios, connect your antennas, and you're ready to go. Extreme performance: straight-fin design with twice the height of other heatsinks for extra heat dissipation performance whether actively or passively cooled.

Most effective solution for reliable performance and longevity. Micro USB plug. Mandatory for applications in high temperature, sealed, or overclocked applications. Long lasting exact fit: cpu and lan chipset heatsinks are fabricated specifically for the Raspberry Pi 3 Model B+ and B. Double-sided 3m thermal transfer tape offers high thermal conductivity and long lasting adhesion in all mounting scenarios.

Radios Low Power v2+v3 and High Gain Antennas - Stratux 1090ES & UAT #ad - Quick and simple installation: peel and stick in the orientation with the most airflow. Two "nano" sized sdrs, 1x pre-programmed for Stratux 1090ES, 1x pre-programmed for Stratux 978 MHz/UAT. For raspberry pi 3 model b, cooling amplification for CPU die area is over 100x! Say goodbye to temperature based performance throttling and maintain consistent maximum performance.

Must have for raspberry pi 3: at full load, bcm2837 soc will reach 100°c. Will not fit into SummitLink cases. Includes 1090 mhz and 978 mhz tuned high gain antennas with MCX-SMA pigtails.

More information about Stratux #ad


Similar products



Black/Grey - Raspberry Pi 3 Case

#ad
Raspberry Pi RPI3CASE-BG #ad - Designed with HATs in mind and featuring multiple removable panels. No more messy thermal paste and compatible with LoveRPi Power over Ethernet HAT for Raspberry Pi 3 Model B+. No more throttling: reduce chip hot-spots and increase thermal dissipation surface area by 10x. Ul listed. Enclose your board as much or as little as necessary to best suit your latest project.

Designed with Pi HAT's in mind. Improved sensitivity radios. 70%+ lower power consumption and optimized heat dissipation. For stratux abs injection molded case ONLY. Raspberry Pi pinout. No soldering needed. Invensense mpu-9250 and Bosch BMP280 Onboard fan speed controller circuit. Includes case, 3 cFM brushless fan, and screws and assembly tools.

Black/Grey - Raspberry Pi 3 Case #ad - For use with Raspberry Pi 2 and 3. Sized for use with "nano" sized sdrs and a Vk-172/GPYes or Vk-162 GPS. Fits stratux AHRS board. Injection molded white ABS with flame retardant. Plug and play with and supported by Stratux project.

More information about Raspberry Pi RPI3CASE-BG #ad


Similar products