LoveRPi Raspberry Pi 3 Model B+ 8GB Plug and Play Starter Kit

LoveRPi - To see it, run diskmgmt. Msc. The metal heatspreader allows it to run at the top speed of 1. 4ghz for longer than the previous model. Fully connected: improvements to antenna design and connectivity brings 5ghz WiFi AC for nearly 5X the WiFi performance than the previous 2. 4ghz wifi N. What's included: raspberry pi 3 model b+ mini computer microsd card pre-flashed with Raspbian Desktop MicroSD to SD Card Adapter LoveRPi® Performance Heatsink Set LoveRPi® Certified 2.

5a microusb power supply loverpi® 1m hdmi cable additional recommended components Not Included: LoveRPi Active Cooling Media Center Polycarbonate Case USB Keyboard and Mouse MicroSD card has multiple partitions. Immediately get running, learning, and doing without the hassle of downloading and flashing images.

LoveRPi Raspberry Pi 3 Model B+ 8GB Plug and Play Starter Kit - It is fully compatible with our power-Over-Ethernet HAT and Active Cooling Media Center Case for the ultimate mini computer! The boot partition is ~100MB and the operating system partition is hidden in Windows. Perfect when paired with a Raspberry Pi Display or LoveRPi Active Cooling Media Center Case. Better performance: our quick peel & stick performance heatsink set makes installation a breeze and lets your Raspberry Pi run for longer and faster.

. Ultimate mini computer: raspberry pi 3 model b+ is new and improved for 2018 with faster CPU and GPU performance, Power-Over-Ethernet Capable Gigabit Ethernet, Bluetooth LE capabilities, advanced 5GHz WiFi-AC, and more!.

More information about LoveRPi

for Raspberry Pi 3 B+ 3.5 inch Touch Screen with Case, 320x480 Pixel Monitor TFT LCD Game Display Support Raspbian, Ubuntu, Kali, RetroPie System

Jun-Electron 8541613031 - The resolution is small, only 320*480 P, the screen often cannot display the complete interface. Provides detailed tutorials to solve the problem of installing drivers and some of the tools that are often used for the Raspberry Pi. After the screen is cover, GPIO cannot be used. Product advantage:1. Need to install the driver, customers often say that after the driver is installed, the system crashes or can display nothing on the screen after installation If you are not familiar with the Raspberry Pi, it is strongly recommended you that use the system with the driver installed 3.

The screen display support 125mhz spi signal input, it can display stable without flicker, the refresh rate is about 50fps, it's enough to play the video and game. Support work with raspbian/Ubuntu/Kali/Retropie systems. Gpio connection method, customers often have wrong connection, Led to the touch function can not be used 5.

for Raspberry Pi 3 B+ 3.5 inch Touch Screen with Case, 320x480 Pixel Monitor TFT LCD Game Display Support Raspbian, Ubuntu, Kali, RetroPie System - Does not support other systems such as Windows. 6. The size is the same as the Raspberry Pi, it can be a touch screen and provide a better human-computer interaction experience. White nylon column can help screen maintain balance. Match for pi 3/3 b+ protective Case for screen and board, easy to install 2. 4.

More information about Jun-Electron 8541613031


Similar products



Raspberry Pi 3 b+ Case, iUniker Raspberry Pi 3 Model B+ Transparent Case with Raspberry Pi Heatsink for Raspberry Pi 3B+, 3B, 2B - Access to All Ports Clear

iUniker IU-RP-047 - Raspberry Pi is not included. For new raspberry Pi 3 b+. Wall mountable. This is an abs raspberry pi protective clear case for raspberry pi 3 b+, 2b package include: 1x Pi Case 1x Screw Set 2x Heatsink 4x Rubber Base Screen connect with spi directly, support double screen display, 3B, Support FBCP software drive, can ajdust the resolution of the software to zoom.

Physical resolution 320x480 with resistive touch control, can be directly connect Raspberry Pi 3 B+, No additional Power. The case is a made of ABS that snaps together around the Raspberry Pi. We offer pre-install driver system image file. Match pc protective case for your screen and Pi, use split design make it easy to install, also match tweezers to make install more easy.

Raspberry Pi 3 b+ Case, iUniker Raspberry Pi 3 Model B+ Transparent Case with Raspberry Pi Heatsink for Raspberry Pi 3B+, 3B, 2B - Access to All Ports Clear - The screen display support 125mhz spi signal input, it can display stable without flicker, the refresh rate is about 50fps, it's enough to play the video and game. Support work with raspbian/Ubuntu/Kali/Retropie systems. Raspberry pi is not included, Comes with 2pcs Heatsink. White nylon column can help screen maintain balance.

This is a very nice looking clear protective case designed specifically for the Raspberry Pi 3 Model B+, 3B, 2B. Access to All ports.

More information about iUniker IU-RP-047


Similar products



Raspberry Pi Mini Camera Video Module 5 Megapixels 1080p Sensor OV5647 Webcam for Raspberry Pi Model A/B/B+, Pi 2 and Raspberry Pi 3, 3b+

Dorhea 6598597463 - It provides the best available protection/accessibility for the Raspberry Pi. We offer pre-install driver system image file. Match pc protective case for your screen and Pi, use split design make it easy to install, also match tweezers to make install more easy. Access to All ports. Wall mountable. Raspberry pi is not included, Comes with 2pcs Heatsink.

Raspberry Pi is not included. White nylon column can help screen maintain balance. This is a very nice looking clear protective case designed specifically for the Raspberry Pi 3 Model B+, 3B, 2B. For new raspberry Pi 3 b+. Screen connect with spi directly, support double screen display, Support FBCP software drive, can ajdust the resolution of the software to zoom.

Raspberry Pi Mini Camera Video Module 5 Megapixels 1080p Sensor OV5647 Webcam for Raspberry Pi Model A/B/B+, Pi 2 and Raspberry Pi 3, 3b+ - Physical resolution 320x480 with resistive touch control, can be directly connect Raspberry Pi 3 B+, No additional Power. Features: angle of view: 54 x 41 degrees Field of View: 2. 0 x 1. 33 m at 2 m full-frame slr lens equivalent: 35 mm fixed focus: 1 m to infinity image sensor: ov5647 maximum photo resolution: 2592 x 1944 pixel supported video Resolution: 1080p30, 720p60 and 640x480p90 Interface: CSI MINI connector 15cm ribbon cable includedPackage Includes: 1 X Raspberry Pi Camera Module 1 X 15cm 15pin FPC cable Note: Raspberry Pi motherboard is NOT included.

The screen display support 125mhz spi signal input, it can display stable without flicker, the refresh rate is about 50fps, it's enough to play the video and game. Support work with raspbian/Ubuntu/Kali/Retropie systems.

More information about Dorhea 6598597463


Similar products



Raspberry Pi 3 Case - Black/Grey

Raspberry Pi RPI3CASE-BG - Wall mountable. Removable side panels with easy access to the GPIO port. Designed with Pi HAT's in mind. Raspberry pi is not included, Comes with 2pcs Heatsink. White nylon column can help screen maintain balance. This is a very nice looking clear protective case designed specifically for the Raspberry Pi 3 Model B+, 3B, 2B.

The screen display support 125mhz spi signal input, the refresh rate is about 50fps, it can display stable without flicker, it's enough to play the video and game. Support work with raspbian/Ubuntu/Kali/Retropie systems. We offer pre-install driver system image file. Match pc protective case for your screen and Pi, use split design make it easy to install, also match tweezers to make install more easy.

Raspberry Pi 3 Case - Black/Grey - High quality -- 100% brand new and in good condition, great performance, with high quality, solid construction. Camera specifications -- the camera is capable of 2592 x 1944 pixel static images, 720 p @ 60 fps and 640 x480 p 60/90 video recording, and also supports 1080 p @ 30 fps, with 5MP OV5647 1080p webcam sensor.

Fixed focus -- the sensor has a native resolution of 5 megapixel with OV5647 sensor in a fixed-focus lens. Compatible with -- high-definition video camera for raspberry Pi Model A or B, model 2, 3 B+, Raspberry Pi 3, B+, Pi 4 B. Csi interface -- this interface uses the dedicated csi interface, a higher bandwidth link which carries pixel data from the camera back to the processor, high data rates, via the CSI bus, and it exclusively carries pixel data.

Official case for the Raspberry Pi from the Raspberry Pi Foundation.

More information about Raspberry Pi RPI3CASE-BG


Similar products



Jun-Electron for Raspberry Pi 3/Pi 3 B+ Case, Dual Cooling Fan, Enclosure Aluminum Alloy Case with Heat-Sink Pillar Dual Fan Case

Jun-Electron E335 - 2. The thermal update tape can guarantee the best thermal driving effect. Removable side panels with easy access to the GPIO port. There are four screws to fix the case with Raspberry Pi board. It provides the best available protection/accessibility for the Raspberry Pi. Designed with Pi HAT's in mind. The armor shell is made of aluminum alloy with CNC machining manufacturing technology.

Removable lid provides easy access to the camera and display ports. Including dual fan and thermal tapes that reduce the temperature for the Raspberry Pi plate. For aluminum alloy housing: 87*56*25mm. 3. Dual cooling experience, no more overheating problems. Used for raspberry Pi 2B/3B/3B+ Module. Passive cooling with housing heat dissipation Design, With 3 built-in Heatsink Pillars to tightly touch with on-board raspberry pi chipset, No More Overheating Problem.

Jun-Electron for Raspberry Pi 3/Pi 3 B+ Case, Dual Cooling Fan, Enclosure Aluminum Alloy Case with Heat-Sink Pillar Dual Fan Case - Silence without noise with great cooling performance, it can drop temp up to 30-37 degree. Radiation protection and difficult to rust. 4. Access to All ports.

More information about Jun-Electron E335


Similar products



Dorhea 39.3 inch Raspberry Pi 3 B+ Camera Cable FFC FPC Ribbon 15 pin Extension Cord Flat Wire Cable Connection for Raspberry Pi 2/3 B B+ Camera Module 39.3'' / 100cm 2 Pcs

Dorhea 8595763407 - Removable side panels with easy access to the GPIO port. All ports and slots of the case can match with Raspberry Pi 3 Model B+ /3B perfectly. Smooth and straight aluminum material, Ultra-thin design & Easy to install. Note: there are 4pcs thermal tape in the packing. White nylon column can help screen maintain balance.

This is a very nice looking clear protective case designed specifically for the Raspberry Pi 3 Model B+, 3B, 2B. Designed with Pi HAT's in mind. Access to All ports. 1 meter 39. 9'' cable for raspberry pi camera is longer than standard cable, which is a good option to locate your camera. Passive cooling with housing heat dissipation Design, With 3 built-in Heatsink Pillars to tightly touch with on-board raspberry pi chipset, No More Overheating Problem.

Dorhea 39.3 inch Raspberry Pi 3 B+ Camera Cable FFC FPC Ribbon 15 pin Extension Cord Flat Wire Cable Connection for Raspberry Pi 2/3 B B+ Camera Module 39.3'' / 100cm 2 Pcs - Silence without noise with great cooling performance, it can drop temp up to 30-37 degree. High quality -- 100% brand new and in good condition, great performance, with high quality, solid construction. Camera specifications -- the camera is capable of 2592 x 1944 pixel static images, 720 p @ 60 fps and 640 x480 p 60/90 video recording, and also supports 1080 p @ 30 fps, with 5MP OV5647 1080p webcam sensor.

Fixed focus -- the sensor has a native resolution of 5 megapixel with OV5647 sensor in a fixed-focus lens. Compatible with -- high-definition video camera for raspberry Pi Model A or B, model 2, Raspberry Pi 3, 3 B+, B+, Pi 4 B.

More information about Dorhea 8595763407


Similar products



Access to all ports - SB Components Raspberry Pi 3 Model B+ Transparent Case

SainStore Inc. Clear Case for Raspberry Pi 3 - For new raspberry Pi 3 b+. The case is a two-piece injection-molded ABS enclosure that snaps together around the Raspberry Pi 2 Model B. Designed with Pi HAT's in mind. Access to All ports. Raspberry pi 3 or Raspberry Pi 2 model B not included. Access to All ports. Screen connect with spi directly, support double screen display, Support FBCP software drive, can ajdust the resolution of the software to zoom.

Physical resolution 320x480 with resistive touch control, can be directly connect Raspberry Pi 3 B+, No additional Power. It provides tough protection for the raspberry Pi Model B+ along with access to all the PI consumer ports as well as DSI, camera and GPIO connectors. Removable Top Frame. Removable side panels with easy access to the GPIO port.

Access to all ports - SB Components Raspberry Pi 3 Model B+ Transparent Case - The screen display support 125mhz spi signal input, the refresh rate is about 50fps, it can display stable without flicker, it's enough to play the video and game. Support work with raspbian/Ubuntu/Kali/Retropie systems. 1 meter 39. 9'' cable for raspberry pi camera is longer than standard cable, which is a good option to locate your camera.

This is an elegant and innovative protective case designed specifically for the Raspberry Pi 2 Model B. It provides the best available protection/accessibility for the Raspberry Pi.

More information about SainStore Inc. Clear Case for Raspberry Pi 3


Similar products



Elegoo EL-CP-004 120pcs Multicolored Dupont Wire 40pin Male to Female, 40pin Male to Male, 40pin Female to Female Breadboard Jumper Wires Ribbon Cables Kit for arduino

Elegoo EL-CP-004 - All ports and slots of the case can match with Raspberry Pi 3 Model B+ /3B perfectly. Smooth and straight aluminum material, Ultra-thin design & Easy to install. Note: there are 4pcs thermal tape in the packing. Passive cooling with housing heat dissipation Design, With 3 built-in Heatsink Pillars to tightly touch with on-board raspberry pi chipset, No More Overheating Problem.

Silence without noise with great cooling performance, it can drop temp up to 30-37 degree. The case is a made of ABS that snaps together around the Raspberry Pi. It provides the best available protection/accessibility for the Raspberry Pi 3 Model B. So we can control the quality of our productions by ourselves for you.

Elegoo EL-CP-004 120pcs Multicolored Dupont Wire 40pin Male to Female, 40pin Male to Male, 40pin Female to Female Breadboard Jumper Wires Ribbon Cables Kit for arduino - Raspberry Pi is not included. The screen display support 125mhz spi signal input, the refresh rate is about 50fps, it can display stable without flicker, it's enough to play the video and game. Support work with raspbian/Ubuntu/Kali/Retropie systems. High quality -- 100% brand new and in good condition, with high quality, great performance, solid construction.

Camera specifications -- the camera is capable of 2592 x 1944 pixel static images, 720 p @ 60 fps and 640 x480 p 60/90 video recording, and also supports 1080 p @ 30 fps, with 5MP OV5647 1080p webcam sensor. Fixed focus -- the sensor has a native resolution of 5 megapixel with OV5647 sensor in a fixed-focus lens.

Compatible with -- high-definition video camera for raspberry Pi Model A or B, Raspberry Pi 3, 3 B+, B+, model 2, Pi 4 B.

More information about Elegoo EL-CP-004


Similar products



iuniker Raspberry Pi 3 B+ Case, Raspberry Pi Fan ABS Case with Cooling Fan, Raspberry Pi Heatsink, Simple Removable Top Cover for Pi 3 B+, Pi 3 Model B, Pi 2 Model B Black for 3B+/3B

iUniker NA - Including 1x 40-pin male to female jumper wires, 1X 40-pin male to male jumper wires, 1x40-pin female to female jumper wires. Access to All ports. Raspberry pi is not included, Comes with 2pcs Heatsink. The case is a made of ABS that snaps together around the Raspberry Pi. Removable Top Frame. What's in the box? 1x iuniker pi case 1x 30mm cooling fan 1x screw sets 3x raspberry Pi Heatsinks Material: ABS Screen connect with spi directly, Support FBCP software drive, support double screen display, can ajdust the resolution of the software to zoom.

Physical resolution 320x480 with resistive touch control, can be directly connect Raspberry Pi 3 B+, No additional Power. The screen display support 125mhz spi signal input, it can display stable without flicker, the refresh rate is about 50fps, it's enough to play the video and game. Support work with raspbian/Ubuntu/Kali/Retropie systems.

iuniker Raspberry Pi 3 B+ Case, Raspberry Pi Fan ABS Case with Cooling Fan, Raspberry Pi Heatsink, Simple Removable Top Cover for Pi 3 B+, Pi 3 Model B, Pi 2 Model B Black for 3B+/3B - Raspberry Pi is not included. It provides the best available protection/accessibility for the Raspberry Pi 3 Model B. Designed with Pi HAT's in mind. Wall mountable. Unique removable top cover design, you can get in touch with the GPIO or Camera Connector Very Simple. We offer pre-install driver system image file.

More information about iUniker NA


Similar products



LoveRPi Raspberry Pi 3 Model B+ Case with Direct GPIO Access - Clear Transparent

LoveRPi 0 - For new raspberry Pi 3 b+. Removable lid provides easy access to the camera and display ports. Include raspberry Pi Heatsink, Better Cooling Experience. It provides the best available protection/accessibility for the Raspberry Pi. Access to All ports. Raspberry pi 3 or Raspberry Pi 2 model B not included. Packing in a color box.

We have always cared about the customer experience and improve the product function details. Unique removable top cover design, you can get in touch with the GPIO or Camera Connector Very Simple. Each cable length: about 20 cm /8-inch. The case is a two-piece injection-molded ABS enclosure that snaps together around the Raspberry Pi 2 Model B.

LoveRPi Raspberry Pi 3 Model B+ Case with Direct GPIO Access - Clear Transparent - Passive cooling with housing heat dissipation Design, With 3 built-in Heatsink Pillars to tightly touch with on-board raspberry pi chipset, No More Overheating Problem. Silence without noise with great cooling performance, it can drop temp up to 30-37 degree. White nylon column can help screen maintain balance.

This is a very nice looking clear protective case designed specifically for the Raspberry Pi 3 Model B+, 3B, 2B. Put b01l5ukapi in the search area for compatible wires headers. Ventilated for expansion and passive cooling: heat is a major problem limiting the performance of the Raspberry Pi 3.

More information about LoveRPi 0


Similar products