Longruner Raspberry Pi Touch Screen with Case Holder, 7 Inch TFT LCD Display HDMI Module 1024×600 for Raspberry Pi 3 2 Model B and RPI 1 B+ A BB Black PC Various Systems (with Protective Case)

#ad
Longruner LSC7BC-US #ad - 3v: the power of the screen is 2. 7dmmsurface treatment : anti-glarecolor arrangement : RGB-Stripenterface: DigitalBlacklight : Highlighted LED lamp backlightingTFT Powerpin Name: 3. 1/ 8/ 7, single-touch and free drive. 0inch diagonaldriver element : a-si tft active matrixdisplay mode : Normally White, TransmissiveHigh Resolution: 1024x600SSD1963 touch panel controllerDot pitch : 0

3v. 5-7v. Raspberry pi board can be installed on the back of the case. Good customer service ♥ if you need any technique support, Please let us know, we will be surely responsible to all problem. When using as a computer monitor, it supports the Raspbian, Ubuntu, Win10 IoT, five point touch and free drive.

Longruner Raspberry Pi Touch Screen with Case Holder, 7 Inch TFT LCD Display HDMI Module 1024x600 for Raspberry Pi 3 2 Model B and RPI 1 B+ A BB Black PC Various Systems (with Protective Case) #ad - With protective case ♥ the raspberry pi display comes with the protective case stand, which is made with Black acrylic. Interface type: 16 paralleloperating temperature : -20 ~ +70 degrees centigradestorage Temperature : -30 ~ +80 degrees centigradeFeature: This 7 inch Capacitive Touch Screen can work with any device that have standard HDMI, but the touch function is just for windows and raspberry pi system.

Backlight power supply pin Name: 5V: backlight power range is 4. 3v; not use 5v, all the pin's voltage on the moduleCan not be more than 3. Support five points touch for windows systemWhen used as a computer monitor, support 10 / 8. We will be surely responsible to all problem, wish you have a good shopping experience.

More information about Longruner LSC7BC-US #ad

CanaKit Raspberry Pi 4 Basic Kit 2GB RAM

#ad
CanaKit #ad - Important note: Micro HDMI cable required for operation. Important note: Raspberry Pi 4 compatible operating system is required for operation. Kit includes: - raspberry Pi 4 Model B with 1. 5ghz 64-bit quad-core armv8 cpu - 2gb ram - canakit usb-c power supply with noise filter ul listed specially designed for the Raspberry Pi 4 5-foot cable - CanaKit USB-C PiSwitch On/Off Power Switch - Set of 3 Aluminum Heat Sinks for the Raspberry Pi 4 Includes raspberry pi 4 model b with 1.

5ghz 64-bit quad-core armv8 CPU 2GB RAM. The canakit usb-c power supply ul listed that is included in this kit is specially designed and tested for the Raspberry Pi 4. Set of 3 aluminum Heat Sinks for the Raspberry Pi 4. Canakit usb-c power supply with noise Filter UL Listed specially designed for the Raspberry Pi 4 5-foot cable.

CanaKit Raspberry Pi 4 Basic Kit 2GB RAM #ad - . The raspberry pi 4 provides desktop performance comparable to entry-level x86 PC systems. Due to the higher power requirements, the Raspberry Pi 4 requires a 3. 0a usb-c power supply. This power supply incorporates a noise filter to provide the highest stability. An exclusive kit from canakit that includes the fastest model of the Raspberry Pi family - the Raspberry Pi 4! The Raspberry Pi 4 offers ground-breaking increases in processor speed, multimedia performance, and connectivity compared to the prior-generation boards, memory, while retaining backwards compatibility and similar power consumption.

More information about CanaKit #ad


Similar products



Raspberry Pi 3 B+ Motherboard

#ad
Element14 Raspberry Pi 3 Model B+ #ad - Technical specifications: - broadcom bcm2837bo 64 bit ARMv8 QUAD Core A53 64bit Processor powered Single Board Computer run at 1. Package contents : - 1x raspberry Pi 3 Model B+ Includes raspberry pi 4 model b with 1. 5ghz 64-bit quad-core armv8 CPU 2GB RAM. Canakit usb-c piswitch On/Off Power Switch. 5 amps.

. 4ghz quad-core 64 bit processor with low energy on-board wi-fi bluetooth and USB Port Built on the latest Broadcom 2837 ARMv8 64 bit processor, Raspberry Pi 3 Model B+ is faster and more powerful than its predecessors. Bluetooth 4. 2, bluetooth Low Energy. 802. 11n wireless lan, 10/100Mbps Lan Speed. 5a adapter is required.

Raspberry Pi 3 B+ Motherboard #ad - 4 usb ports, full hdmi port, 40 gpio pins, Combined 3.5mm audio jack and composite video. Camera interface csi, micro sd card slot now push-pull rather than push-push, display interface dsI, VideoCore IV 3D graphics core. It has improved power management to support more powerful external USB devices and now comes with built-in wireless and Bluetooth connectivity.

4ghz- 1gb ram - bcm43143 wi-fi on board- bluetooth low energy ble on board- 40 pin extended gpio - 4 x usb2 ports- 4 pole stereo output and composite video port- Full size HDMI- CSI camera port for connecting the Raspberry Pi camera - DSI display port for connecting the Raspberry Pi touch screen display - Micro SD port for loading your operating system and storing data- Upgraded switched Micro USB power source now supports up to 2.

More information about Element14 Raspberry Pi 3 Model B+ #ad


Similar products



CanaKit 5V 2.5A Raspberry Pi 3 B+ Power Supply / Adapter UL Listed

#ad
Cana Kit Corporation DCAR-RSP-2A5 #ad - Canakit usb-c piswitch On/Off Power Switch. 5 feet cord length. Set of 3 aluminum Heat Sinks for the Raspberry Pi 4. 4 usb ports, 40 gpio pins, full hdmi port, Combined 3.5mm audio jack and composite video. Camera interface csi, micro sd card slot now push-pull rather than push-push, display interface dsI, VideoCore IV 3D graphics core.

Tested with all versions of the Raspberry Pi including the Pi 2 and Pi 3. Bluetooth 4. 2, bluetooth Low Energy. Includes raspberry pi 4 model b with 1. 5ghz 64-bit quad-core armv8 CPU 2GB RAM. Micro USB plug. With this power supply, you can power the Raspberry Pi 3 at full load as well as up to 1. 2a across the four USB ports.

CanaKit 5V 2.5A Raspberry Pi 3 B+ Power Supply / Adapter UL Listed #ad - 2. 5a is now a requirement for the Raspberry Pi 3. The canaKit 2. 5a raspberry pi power supply / adapter has been specially designed and tested for the new Raspberry Pi 3 and incorporates an inline noise filter for highest stability and reliable operation. 802. 11n wireless lan, 10/100Mbps Lan Speed.

More information about Cana Kit Corporation DCAR-RSP-2A5 #ad


Similar products



CanaKit Raspberry Pi 3 B+ B Plus with 2.5A Power Supply UL Listed

#ad
CanaKit NA #ad - Set of 2 aluminum Heat Sinks. 5 feet cord length. Includes raspberry pi 3 b+ b plus with 1. 4 ghz 64-bit quad-core processor, 1 GB RAM. Canakit usb-c piswitch On/Off Power Switch. Micro USB plug. 4 usb ports, full hdmi port, 40 gpio pins, Combined 3.5mm audio jack and composite video. Camera interface csi, display interface dsI, Micro SD card slot now push-pull rather than push-push, VideoCore IV 3D graphics core.

Tested with all versions of the Raspberry Pi including the Pi 2 and Pi 3. Output 5v dc 2. 5a regulated input 100V to 240V AC. This power supply can power the raspberry Pi 3 B+ and other USB accessories such as most portable hard drives without requiring an external powered USB hub. Kit includes: raspberry Pi 3 Model B+ B Plus with 1.

CanaKit Raspberry Pi 3 B+ B Plus with 2.5A Power Supply UL Listed #ad - 4ghz 64-bit quad-core armv8 cpu bcm2837b0 1 gb lpddR2 SDRAM CanaKit 2. 5a micro usb power supply with noise filter ul listed specially designed for the Raspberry Pi 3 B+ 5-foot cable Set of 2 Aluminum Heat Sinks CanaKit Quick-Start Guide Includes raspberry pi 4 model b with 1. 5ghz 64-bit quad-core armv8 CPU 2GB RAM.

Ul listed. 802.

More information about CanaKit NA #ad


Similar products



Kuman 7 Inch Capacitive Touch Screen TFT LCD Display HDMI Module 800x480 for Raspberry Pi 3 2 Model B and RPi 1 B+ A BB Black PC Various Systems SC7B 7 Inch Raspberry Pi Touch Screen

#ad
Kuman SC7B #ad - Image 4:3 / 16:9 display format conversion. Operating voltage: 5v 1a power supply current requirements within the above 2A, On board 400mA DC-DC Boost regulator to provide power supply to LCD backlight. Support 864 x 480 x 24bit graphics content through ssd1963 controller. It also equips parallel mcU interfaces in different bus width to receive graphics data and command from MCU.

Kuman 7 Inch Capacitive Touch Screen TFT LCD Display HDMI Module 800x480 for Raspberry Pi 3 2 Model B and RPi 1 B+ A BB Black PC Various Systems SC7B 7 Inch Raspberry Pi Touch Screen #ad - And also supports banana Pi/Banana Pro, comes with related images like:Lubuntu, Raspbian. We provided cd disk with related driver and souce code to you, If you are unsure about any of the technical issues. Please contact us Freely. Canakit Quick-Start Guide. Set of 2 aluminum Heat Sinks. Micro USB plug. When used as a computer monitor, support 10 / 8.

1 / 8 / 7, five point touch, Free drive Includes raspberry pi 4 model b with 1. 5ghz 64-bit quad-core armv8 CPU 2GB RAM. Dual band 2. 4ghz and 5ghz ieee 802. 11. B/g/n/ac wireless LAN, Enhanced Ethernet Performance.

More information about Kuman SC7B #ad


Similar products



Raspberry Pi Camera Module V2-8 Megapixel,1080p

#ad
Raspberry Pi RPI-CAM-V2 #ad - 802. 11n wireless lan, 10/100Mbps Lan Speed. Canakit 2. 5a usb power supply with micro usb cable and Noise Filter - Specially designed for the Raspberry Pi 3 B+ UL Listed. Canakit usb-c piswitch On/Off Power Switch. Bluetooth 4. 2, bluetooth Low Energy. The raspberry pi camera v2 features the same, tiny footprint 25mm x 23mm x 9mm as the original Pi Camera module, but features an upgraded Sony IMX219 image sensor which has a native resolution of 8 megapixels.

Dual band 2. 4ghz and 5ghz ieee 802. 11. B/g/n/ac wireless LAN, Enhanced Ethernet Performance. 1. 4ghz 64-bit quad-core armv8 CPU, 1 GB RAM. It is plug-and-play compatible latest version of the Raspbian operating system making it perfect for time-lapse photography, recording video, motion detection, and security applications.

Raspberry Pi Camera Module V2-8 Megapixel,1080p #ad - Includes raspberry pi 4 model b with 1. 5ghz 64-bit quad-core armv8 CPU 2GB RAM. Includes raspberry pi 3 b+ b plus with 1. 4 ghz 64-bit quad-core processor, 1 GB RAM. Image 4:3 / 16:9 display format conversion.

More information about Raspberry Pi RPI-CAM-V2 #ad


Similar products



Kuman Remote Control Boat, 25KM/H High Speed Waterproof Rc Racing Boat with 180º Flip Function,2.4GHz LCD Display Controller for Kids/Adults Pool & Outdoor Use

#ad
Kuman #ad - Sharp v-shaped bow resembling the dripping drops and the streamlined hull design make it able to handle rough water and sail fast. Canakit usb-c piswitch On/Off Power Switch. And also supports banana Pi/Banana Pro, comes with related images like:Lubuntu, Raspbian. We provided cd disk with related driver and souce code to you, If you are unsure about any of the technical issues.

Please contact us Freely. Second generation Raspberry Pi Camera Module with Fixed Focus Lens. Canakit 2. 5a usb power supply with micro usb cable and Noise Filter - Specially designed for the Raspberry Pi 3 B+ UL Listed. Display stand: help protect propeller and rudder when not in use. Its display interface supports common RAM-less LCD driver of color depth up to 24 bit-perpixel.

Kuman Remote Control Boat, 25KM/H High Speed Waterproof Rc Racing Boat with 180º Flip Function,2.4GHz LCD Display Controller for Kids/Adults Pool & Outdoor Use #ad - Bow protective case: the exclusive protective case protects the bow from rubs or collisions. 4 usb ports, 40 gpio pins, full hdmi port, Combined 3.5mm audio jack and composite video. Camera interface csi, micro sd card slot now push-pull rather than push-push, display interface dsI, VideoCore IV 3D graphics core.

Tested with all versions of the Raspberry Pi including the Pi 2 and Pi 3. Description: with this rc racing boat, or play around swimming pools - whether you're a beginner or expert, you can race your friends across the water, you're sure to have a blast.

More information about Kuman #ad


Similar products