Longruner 7 Inch Capacitive Touch Screen TFT LCD Display HDMI Module 1024600 for Raspberry Pi 3 2 Model B and RPI 1 B+ A BB Black PC Various Systems

Longruner LSC7B - We provided cd disk with related driver and sauce code to you, If you are unsure about any of the technical issues. Please contact us freely. Feature: lCD size: 7. 0 inch diagonal driver element: a-si tft active matrix display mode: normally White, transmissive high resolution: 1152, 000 dots 800 x 3rgb x 480 SSD1963 touch panel controller Dot pitch: 0

0642w x 01790hmm active area: 154. 08wx 85. 92h module size: 164. 9wx1000hx5. 7dmm surface treatment: anti-glare color arrangement: rgb-stripe interface: digital backlight: highlighted LED lamp backlighting TFT powerpin name: 3. 3v: the power of the screen is 2. 8-3. 3v; not use 5v, all the pin's voltage on the module can not be more than 3.

Longruner 7 Inch Capacitive Touch Screen TFT LCD Display HDMI Module 1024600 for Raspberry Pi 3 2 Model B and RPI 1 B+ A BB Black PC Various Systems - 3v. Its display interface supports common ram-less LCD driver of color depth up to 24 bit-perpixel. Please Peel off before use. Note: 1. Please note supported update raspberry Pi 3 2 and rpi 1 model B B+ BB Black Supported 2.

More information about Longruner LSC7B

Kuman 7 inch Raspberry Pi Touch Screen Case Holder

kuman Screen Case Holder - Kuman raspberry pi 7 inch TFT touch screen acrylic case set, making your experiment more conveniently. Screen, raspberry pi and cable are not included. Material: this rpi case holder is made with Black acrylic. Or you could let us know, we will send to you. Saves space: raspberry pi board can be installed on the back.

Kindly note: there is a film in each case component, please remove it before assembling it. Screen, raspberry pi and cable are not included, case only. Assemble: we have attached the 7 in screen case assembling instruction in QA, Please refer to it if you need. Application: this acrylic protective case bracket suitable for raspberry pi 7 inch TFT touch screen, the screen size can be 164.

Kuman 7 inch Raspberry Pi Touch Screen Case Holder - 9wx1000hx5. 7dmm. Please see the advertisement image or contact us to confirm if it is suitable for your display. Our 7 inch touch screen : B01F3801A2. Specification: Color:Black Size: 102 * 16.

More information about kuman Screen Case Holder


Similar products



Raspberry Pi 3 B+ Motherboard

Element14 Raspberry Pi 3 Model B+ - 4ghz- 1gb ram - bcm43143 wi-fi on board- bluetooth low energy ble on board- 40 pin extended gpio - 4 x usb2 ports- 4 pole stereo output and composite video port- Full size HDMI- CSI camera port for connecting the Raspberry Pi camera - DSI display port for connecting the Raspberry Pi touch screen display - Micro SD port for loading your operating system and storing data- Upgraded switched Micro USB power source now supports up to 2.

Technical specifications: - broadcom bcm2837bo 64 bit ARMv8 QUAD Core A53 64bit Processor powered Single Board Computer run at 1. Material: this rpi case holder is made with Black acrylic. Our 7 inch touch screen : B01F3801A2. 4 usb ports, full hdmi port, 40 gpio pins, Combined 3.5mm audio jack and composite video.

Raspberry Pi 3 B+ Motherboard - Camera interface csi, micro sd card slot now push-pull rather than push-push, Display interface DSI, VideoCore IV 3D graphics core. It has improved power management to support more powerful external USB devices and now comes with built-in wireless and Bluetooth connectivity. 5a adapter is required. To take full advantage of the improved power management on the Raspberry Pi 3 and provide support for even more powerful devices on the USB ports, a 2.

Package contents : - 1x raspberry pi 3 model b+ application: this acrylic protective case bracket suitable for raspberry pi 7 inch TFT touch screen, the screen size can be 164.

More information about Element14 Raspberry Pi 3 Model B+


Similar products



RS Raspberry Pi 7-Inch LCD Touch Screen Case, Black

Raspberry Pi FBA_102035 - Material: this rpi case holder is made with Black acrylic. This case is designed to house your Raspberry Pi board and the official Raspberry Pi 7" Lcd touch screen providing protection to the board and the display. Or you could let us know, we will send to you. Saves space: raspberry pi board can be installed on the back.

Kindly note: there is a film in each case component, please remove it before assembling it. 1. 4ghz 64-bit quad-core armv8 CPU, 1 GB RAM. Note: raspberry pi board and Raspberry Pi LCD touch screen are sold separately. Our 7 inch touch screen : B01F3801A2. Bluetooth 4. 2, bluetooth Low Energy. 802. 11n wireless lan, 10/100Mbps Lan Speed.

RS Raspberry Pi 7-Inch LCD Touch Screen Case, Black - Case compatible only with the official Raspberry Pi 7" Lcd touch screen. Screen, raspberry pi and cable are not included, case only. Assemble: we have attached the 7 in screen case assembling instruction in QA, Please refer to it if you need. 4 usb ports, 40 gpio pins, full hdmi port, Combined 3.5mm audio jack and composite video.

More information about Raspberry Pi FBA_102035


Similar products



CanaKit Raspberry Pi 3 B+ B Plus with 2.5A Power Supply UL Listed

CanaKit NA - Canakit 2. 5a usb power supply with micro usb cable and Noise Filter - Specially designed for the Raspberry Pi 3 B+ UL Listed. Canakit Quick-Start Guide. 802. 11n wireless lan, 10/100Mbps Lan Speed. This power supply can power the raspberry Pi 3 B+ and other USB accessories such as most portable hard drives without requiring an external powered USB hub.

Kit includes: raspberry Pi 3 Model B+ B Plus with 1. 4ghz 64-bit quad-core armv8 cpu bcm2837b0 1 gb lpddR2 SDRAM CanaKit 2. 5a micro usb power supply with noise filter ul listed specially designed for the raspberry Pi 3 B+ 5-foot cable Set of 2 Aluminum Heat Sinks CanaKit Quick-Start Guide Application: this acrylic protective case bracket suitable for raspberry pi 7 inch TFT touch screen, the screen size can be 164.

CanaKit Raspberry Pi 3 B+ B Plus with 2.5A Power Supply UL Listed - 9wx1000hx5. 7dmm. Important note: if you see a rainbow splash screen with a lightning bolt symbol, this indicates you are NOT using B+ compatible software. Bluetooth 4. 2, bluetooth Low Energy. Our 7 inch touch screen : B01F3801A2.

More information about CanaKit NA


Similar products



Miuzei Raspberry Pi 3 B+ Case with Fan Cooling and 3× Heat-Sinks, 5V 2.5A Power Supply with On/Off Switch Cable for RPi 3 B+, 3B, 2b

Miuzei NA - Made of acrylic, the pi case makes sure that won't block Pi's Wifi / Bluetooth signal. 4 usb ports, full hdmi port, 40 gpio pins, Combined 3.5mm audio jack and composite video. Camera interface csi, micro sd card slot now push-pull rather than push-push, Display interface DSI, VideoCore IV 3D graphics core.

This case is designed to house your Raspberry Pi board and the official Raspberry Pi 7" Lcd touch screen providing protection to the board and the display. Includes raspberry pi 3 b+ b plus with 1. 4 ghz 64-bit quad-core processor, 1 GB RAM. Canakit 2. 5a usb power supply with micro usb cable and Noise Filter - Specially designed for the Raspberry Pi 3 B+ UL Listed.

Miuzei Raspberry Pi 3 B+ Case with Fan Cooling and 3× Heat-Sinks, 5V 2.5A Power Supply with On/Off Switch Cable for RPi 3 B+, 3B, 2b - 1 small components inside, please away from young kids below 3yrs. Screen, raspberry pi and cable are not included, case only. Assemble: we have attached the 7 in screen case assembling instruction in QA, Please refer to it if you need. 2 kindly to know this case can't fit for ASUS tinker board. Any question there, please don't hesitate to contact us to get support and services via Buyer Message or Q&A Application: this acrylic protective case bracket suitable for raspberry pi 7 inch TFT touch screen, the screen size can be 164.

9wx1000hx5.

More information about Miuzei NA


Similar products



Battery Pack for Raspberry Pi 3 B+, 4000mAh, Suction

Yapears 5647469919 - Canakit 2. 5a usb power supply with micro usb cable and Noise Filter - Specially designed for the Raspberry Pi 3 B+ UL Listed. Set of 2 aluminum Heat Sinks. Application: this acrylic protective case bracket suitable for raspberry pi 7 inch TFT touch screen, the screen size can be 164. 9wx1000hx5. 7dmm. The same case kit for rpi 4, please go to: b07ttn1m7g9 layers case for Raspberry Pi 3 model B+ / Raspberry pi 3 / pi 2 Not include Pi Board.

4 usb ports, full hdmi port, 40 gpio pins, Combined 3.5mm audio jack and composite video. Camera interface csi, micro sd card slot now push-pull rather than push-push, Display interface DSI, VideoCore IV 3D graphics core. This case is designed to house your Raspberry Pi board and the official Raspberry Pi 7" Lcd touch screen providing protection to the board and the display.

Battery Pack for Raspberry Pi 3 B+, 4000mAh, Suction - Includes raspberry pi 3 b+ b plus with 1. 4 ghz 64-bit quad-core processor, 1 GB RAM. Our 7 inch touch screen : B01F3801A2. Or you could let us know, we will send to you. Saves space: raspberry pi board can be installed on the back. Kindly note: there is a film in each case component, please remove it before assembling it.

More information about Yapears 5647469919


Similar products



Freenove Ultimate Starter Kit for Raspberry Pi 4 B 3 B+, 434 Pages Detailed Tutorials, Python C Java, 223 Items, 57 Projects, Learn Electronics and Programming, Solderless Breadboard

Freenove NA - Material: this rpi case holder is made with Black acrylic. 223 items for 57 interesting projects -> Each project has circuit diagram and tested code with detailed explanation. Compatible models -> raspberry pi 4b / 3b / 3b+ / 3a+ / 1A+ / 2B / zero w / 1B+ / Zero. Screen, raspberry pi and cable are not included, case only.

Assemble: we have attached the 7 in screen case assembling instruction in QA, Please refer to it if you need. The same case kit for rpi 4, please go to: b07ttn1m7g9 layers case for Raspberry Pi 3 model B+ / Raspberry pi 3 / pi 2 Not include Pi Board. You can download the tutorials and code before purchasing: https://git.

Freenove Ultimate Starter Kit for Raspberry Pi 4 B 3 B+, 434 Pages Detailed Tutorials, Python C Java, 223 Items, 57 Projects, Learn Electronics and Programming, Solderless Breadboard - Io/fjgtr Contents of Tutorial. Pdf: preface raspberry pi install the system chapter 0 preparation  Component List  Optional Components  Raspbian System  Remote desktop & VNC Chapter 1 LED  Project 1. 1 blink   . Accurate plugs on the case are available to connect Pi's GPIO, USB, SD, HDMI, Power Supply etc ports.

Specially come with mini fan and 3 pcs heatsinks for quick cooling CPU/ROM/RAM, also has a stable 2. 5a power supply with a handy on/off switch on the 1.

More information about Freenove NA


Similar products



CanaKit Raspberry Pi 3 B+ B Plus with Premium Clear Case and 2.5A Power Supply

CanaKit NA - Important note: if you see a rainbow splash screen with a lightning bolt symbol, this indicates you are NOT using B+ compatible software. Noobs 2. 7. 0 or later is required for operation of the B+. 4 usb ports, 40 gpio pins, full hdmi port, Combined 3.5mm audio jack and composite video. Camera interface csi, micro sd card slot now push-pull rather than push-push, Display interface DSI, VideoCore IV 3D graphics core.

This case is designed to house your Raspberry Pi board and the official Raspberry Pi 7" Lcd touch screen providing protection to the board and the display. Includes raspberry pi 3 b+ b plus with 1. 4 ghz 64-bit quad-core processor, 1 GB RAM. The same case kit for rpi 4, please go to: b07ttn1m7g9 layers case for Raspberry Pi 3 model B+ / Raspberry pi 3 / pi 2 Not include Pi Board.

CanaKit Raspberry Pi 3 B+ B Plus with Premium Clear Case and 2.5A Power Supply - Made of acrylic, the pi case makes sure that won't block Pi's Wifi / Bluetooth signal. 802. 11n wireless lan, 10/100Mbps Lan Speed. An exclusive kit from canakit that includes the fastest model of the raspberry Pi family - the Raspberry Pi 3 Model B+ B Plus!The Raspberry Pi 3 Model B+ is the latest production Raspberry Pi 3 featuring a 64-bit quad core processor running at 1.

4 ghz. Canakit 2.

More information about CanaKit NA


Similar products



Geekworm NVIDIA Jetson Nano Metal Case/Enclosure with Power & Reset Control Switch for NVIDIA Jetson Nano Developer Kit

Geekworm - Or you could let us know, we will send to you. Saves space: raspberry pi board can be installed on the back. Kindly note: there is a film in each case component, please remove it before assembling it. 1. 4ghz 64-bit quad-core armv8 CPU, 1 GB RAM. Dual band 2. 4ghz and 5ghz ieee 802. 11. B/g/n/ac wireless LAN, Enhanced Ethernet Performance.

4 usb ports, full hdmi port, 40 gpio pins, Combined 3.5mm audio jack and composite video. Camera interface csi, display interface DSI, micro sd card slot now push-pull rather than push-push, VideoCore IV 3D graphics core. This case is designed to house your Raspberry Pi board and the official Raspberry Pi 7" Lcd touch screen providing protection to the board and the display.

Geekworm NVIDIA Jetson Nano Metal Case/Enclosure with Power & Reset Control Switch for NVIDIA Jetson Nano Developer Kit - Includes raspberry pi 3 b+ b plus with 1. 4 ghz 64-bit quad-core processor, 1 GB RAM. Three antenna holes are reserved to faciliate the arrangement of the external antenna and raspberry pi official camera, The diameter of the antenna hole is 7. 3mm. Screen, raspberry pi and cable are not included, case only. Assemble: we have attached the 7 in screen case assembling instruction in QA, Please refer to it if you need.

More information about Geekworm


Similar products



CanaKit 5V 2.5A Raspberry Pi 3 B+ Power Supply / Adapter UL Listed

Cana Kit Corporation DCAR-RSP-2A5 - Canakit Quick-Start Guide. 2. 5a is now a requirement for the Raspberry Pi 3. The power supply still has about 05a of output power to spare, so even at the maximum current supported by the Raspberry Pi 3, the power supply is not at its absolute maximum. Dual band 2. 4ghz and 5ghz ieee 802. 11. B/g/n/ac wireless LAN, Enhanced Ethernet Performance.

For the dc 5v power supply, refer to ASIN :B07413Q5Y4. Micro USB plug. Dual band 2. 4ghz and 5ghz ieee 802. 11. B/g/n/ac wireless LAN, Enhanced Ethernet Capability. It is also ideal for use by anyone over-clocking the Raspberry Pi which causes higher power requirements that a lower power adapter may not be able to supply.

CanaKit 5V 2.5A Raspberry Pi 3 B+ Power Supply / Adapter UL Listed - N100 casefor jetson nano only, t100-c1 caseasin:b07vykrjqy, T300-C2 casefor Jetson Nano and T300 2. 5 inch sata ssd/hDD Shield. Equippped with power switch and reset switch, and it's reserve the gpio hole and the installation space of the fan, you need to buy the fan yourself, suggest to use this Noctua NF-A4x20 5V PWM fan, refer to ASIN: B071FNHVXN.

The nvidia jetson nano developer kit and antenna are not included, and the 4-pin cooling fan is not included in the packing list. Tested with all versions of the Raspberry Pi including the Pi 2 and Pi 3.

More information about Cana Kit Corporation DCAR-RSP-2A5


Similar products