HiLetgo 3pcs Pro Micro Atmega32U4 5V 16MHz Bootloadered IDE Micro USB Pro Micro Development Board Microcontroller Compatible to Arduino Pro Micro Serial Connection with Pin Header

#ad
HiLetgo® #ad - 4 x 10-bit adc pins, 12 x Digital I/Os. If you're supplying unregulated power to the board, be sure to connect to the "RAW" pin on not VCC. Rx and tx Hardware Serial Connections. Description: 1. The usb transceiver inside the 32u4 allows us to add USB connectivity on board and do away with bulky external USB interface.

2. Supported by arduino IDE v1. 01. The pro micro is similar to the Pro mini except with a ATmega32U4 on board. Features: atmega32u4 running at 5V/16MHz Supported by Arduino IDE v1. 01 on-board micro-usb connector for programming 4 x 10-bit ADC pins, 12 x Digital I/Os Rx and Tx Hardware Serial Connections Note: 1.

HiLetgo 3pcs Pro Micro Atmega32U4 5V 16MHz Bootloadered IDE Micro USB Pro Micro Development Board Microcontroller Compatible to Arduino Pro Micro Serial Connection with Pin Header #ad - When you open the arduino ide software, pls go to the tool and choose the board "Arduino Leonardo" 2. The acceptable voltage range is 5 to 9 V. Package included: 3* pro micro atmega32u4 5v/16MHz Development Board Atmega32u4 running at 5V/16MHz. Running at 16mhz and 5v, this board will remind you a lot of your other favorite Arduino-compatible boards but this little guy can go just about anywhere.

. This tiny little board does all of the neat-o arduino tricks that you're familiar with: 4 channels of 10-bit ADC, 5 PWM pins, 12 DIOs as well as hardware serial connections Rx and Tx.

More information about HiLetgo® #ad

Pack of 100 Pieces McIgIcM 1N4148 Switching Diode 100V 200mA Hole DO-35

#ad
McIgIcM 8308697 #ad - Voltage - dc reverse vr max:100vcurrent - average rectified io:200mavoltage - forward vf max @ if:1v @ 10maspeed:small signal =< 200ma io, f:4pf @ 0v, any speedreverse recovery time trr:4nscurrent - reverse leakage @ vr:5µa @ 100vcapacitance @ vr, 1mhzmounting type:Through HolePackage / Case:DO-204AH, DO-35, AxialSupplier Device Package:DO-35Operating Temperature - Junction:-65°C ~ 175°CWe make professional person test our product to ensure our great quality!We have not authorized to any other seller on Amazon so that we only ensure the quality of us! 300pcs 1n4148 small signal fast switching Diodes High-Speed Axial 200mA 100V DO-35.

See picture 4-5 for Specifications Datasheet. We are the only brand that is not authorized to any other seller on Amazon! Ensure product excellence. Contact us for Better Price for Bulk Orders. All products are tested for stability, consistency and reliability.

More information about McIgIcM 8308697 #ad


Similar products



OSOYOO Pro Micro ATmega32U4 5V/16MHz Module Board with 2 Row pin Header for arduino Leonardo Replace ATmega328 Pro Mini

#ad
Shenzhen vership Co. LTD DBAD100200 #ad - If you're supplying unregulated power to the board, be sure to connect to the "RAW" pin on not VCC. This tiny little board does all of the neat-o arduino tricks that you're familiar with: 4 channels of 10-bit ADC, 5 PWM pins, 12 DIOs as well as hardware serial connections Rx and Tx. The usb transceiver inside the 32u4 allows us to add USB connectivity on board and do away with bulky external USB interface 2.

On-board micro-USB connector for programming. Supported under Arduino IDE v1. 01. 1. The pro micro is similar to the Pro mini except with a ATmega32U4 on board. This latest revision corrects the silk error from the last version of the board so that pin 14 is correctly labeled. Feature: atmega32u4 running at 5V/16MHz Supported under Arduino IDE v1.

OSOYOO Pro Micro ATmega32U4 5V/16MHz Module Board with 2 Row pin Header for arduino Leonardo Replace ATmega328 Pro Mini #ad - 01 recommand power supply for board: 6-7v, less than 9v on-board micro-usb connector for programming 4 x 10-bit adc pins 12 x digital i/os 5 are pwm capable Rx and Tx Hardware Serial Connections Our Smallest Arduino-Compatible Board Yet Package includes: 1 x OSOYOO Pro Micro ATmega32U4 Module for Arduino 300pcs 1n4148 small signal fast switching Diodes High-Speed Axial 200mA 100V DO-35.

If it can't be recognized by your computer when you use it, may you need to install a driver, please change another USB cable or computers to test, we made a detail tutorial, if still no any update, you can visit: https://youtu. Be/9k5mk-fhf24 if still not solved it, please tell us.

More information about Shenzhen vership Co. LTD DBAD100200 #ad


Similar products



ELEGOO for Arduino Nano V3.0, Nano Board CH340/ATmega328P Without USB Cable, Compatible with Arduino Nano V3.0 Nano x 3 Without Cable

#ad
ELEGOO EL-CB-005 #ad - The power source is automatically selected to the highest voltage source. Ensure product excellence. Contact us for Better Price for Bulk Orders. Use the driver from above link. It is a smallest, complete, and breadboard friendly board. It lacks only a dc power jack, and works with a Mini-B USB cable instead of a standard one.

It has more or less the same functionality of the Arduino/Genuino UNO, but in a different package. See picture 4-5 for Specifications Datasheet. 4 x 10-bit ADC pins. Supported under Arduino IDE v1. 01. We are the only brand that is not authorized to any other seller on Amazon! On-board micro-USB connector for programming.

ELEGOO for Arduino Nano V3.0, Nano Board CH340/ATmega328P Without USB Cable, Compatible with Arduino Nano V3.0 Nano x 3 Without Cable #ad - All products are tested for stability, consistency and reliability. It's got a pin layout that works well with the Mini or the Basic Stamp TX, power and ground on the other. The nano can be powered via the mini-b usb connection, 7-12V unregulated external power supply pin 30, or 5V regulated external power supply pin 27.

300pcs 1n4148 small signal fast switching Diodes High-Speed Axial 200mA 100V DO-35. You could download the driver of Elegoo Nano V3.

More information about ELEGOO EL-CB-005 #ad


Similar products



KEYESTUDIO Leonardo R3 Development Board with USB Cable for Arduino

#ad
keyes KS0248 #ad - 12 x digital I/Os. Led: 13. It's got a pin layout that works well with the Mini or the Basic Stamp TX, power and ground on the other. The nano can be powered via the mini-b usb connection, 7-12V unregulated external power supply pin 30, or 5V regulated external power supply pin 27. See picture 4-5 for Specifications Datasheet.

The nano is using the chips atmega328p and cH340, not FT232 as official Arduino, so pls. It is important to note that spi pins do not connect to any number I/O pins like UNO, they can only work on the ICSP port. This means that if your expansion board has no ICSP pin connected to the 6 feet, it will not work.

KEYESTUDIO Leonardo R3 Development Board with USB Cable for Arduino #ad - List: 1 x keyestudio leonardo r3 development board 1 x usb cable 300pcs 1n4148 small signal fast switching Diodes High-Speed Axial 200mA 100V DO-35. We are the only brand that is not authorized to any other seller on Amazon! It has 20 digital input/output pins of which 7 can be used as pwM outputs, 12 analog inputs, an ICSP header, a 16 MHz crystal oscillator, a power jack, a micro USB connection, and a reset button.

The leonardo differs from other arduino boards using separate USB-Serial chip in that the ATmega32u4 has built-in USB communication, eliminating the need for a secondary processor. This allows the leonardo to appear to a connected computer as a mouse and keyboard. Has fcc and ce certification that they are made from environmentally friendly production technology and materials, made function, voltage, current testing before packaging.

Atmega 32u4 running at 5V/16MHz.

More information about keyes KS0248 #ad


Similar products



Pack of 100 Pieces Chanzon 1N4148 Small Signal Fast Switching Diodes High-Speed Axial 200mA 100V DO-35 DO-204AH IN4148 4148 200 mA 100 Volt

#ad
CHANZON 1N4148 x 100 Pieces #ad - Use the driver from above link. It is a smallest, complete, and breadboard friendly board. Ensure product excellence. Contact us for Better Price for Bulk Orders. We are the only brand that is not authorized to any other seller on Amazon! See picture 4-5 for Specifications Datasheet. See picture 2-7 for Specifications Datasheet.

. 4 x 10-bit ADC pins. Lead-free / rohs compliant Electronics Component / Through Hole Glass. Atmega 32u4 running at 5V/16MHz. High speed switching / high Forward Surge Current Capability / High Temperature Soldering. 12 x digital I/Os. Please refer to image 2-7 for the specification datasheet. Product type: switching diodebrand: chanzonpart number: 1n4148package case: do-35qTY: 100Note:Pack in a ESD Bag with Main Specs Label, for Long Time Protection and Indetification.

Pack of 100 Pieces Chanzon 1N4148 Small Signal Fast Switching Diodes High-Speed Axial 200mA 100V DO-35 DO-204AH IN4148 4148 200 mA 100 Volt #ad - The nano is using the chips atmega328p and cH340, not FT232 as official Arduino, so pls. The power source is automatically selected to the highest voltage source. The keyestudio leonardo is a microcontroller board based on the ATmega32u4. It has 20 digital input/output pins of which 7 can be used as pwM outputs, a 16 MHz crystal oscillator, 12 analog inputs, a power jack, an ICSP header, a micro USB connection, and a reset button.

The leonardo differs from other arduino boards using separate USB-Serial chip in that the ATmega32u4 has built-in USB communication, eliminating the need for a secondary processor.

More information about CHANZON 1N4148 x 100 Pieces #ad


Similar products



MakerFocus 2pcs I2C OLED Display Module 0.91 Inch I2C SSD1306 OLED Display Module White I2C OLED Screen Driver DC 3.3V~5V for Arduino

#ad
MakerFocus #ad - Atmega 32u4 running at 5V/16MHz. High speed switching / high Forward Surge Current Capability / High Temperature Soldering. 2pcs i2c oled display module 128x32 OLED 091 inch i2c ssd1306 oled display module white I2C OLED Screen Driver DC 3. 3v~5v for arduinodescription:OLED display, no need backlight, self-illumination.

The display performance is better than the traditional LCD display, also lower consumption. Specifications:driver IC: SSD1306Size: 091 inch oledresolution: 128 x 32size: 38 * 12 mminterface type: iic interfaceDisplay Color: WhitePin Description:GND: Power GroundVCC: Power + DC 3. 3 ~5voperating temperature:-40 ~ 85 ℃scl: Clock LineSDA: Data LinePackage Including:2 * 0

MakerFocus 2pcs I2C OLED Display Module 0.91 Inch I2C SSD1306 OLED Display Module White I2C OLED Screen Driver DC 3.3V~5V for Arduino #ad - 91 inch i2c ssd1306 oled white display module 300pcs 1n4148 small signal fast switching Diodes High-Speed Axial 200mA 100V DO-35. See picture 4-5 for Specifications Datasheet. Plz note: these i2c olED Display Modules come without pin headers. The display performance is better than the traditional LCD display, also lower consumption.

Ssd 1306 oled display; i2c oled display, IIC I2C communications simplifies connections;. The power source is automatically selected to the highest voltage source. The keyestudio leonardo is a microcontroller board based on the ATmega32u4.

More information about MakerFocus #ad


Similar products



MakerFocus 2pcs I2C OLED Display Module 0.91 Inch I2C SSD1306 OLED Display Module Blue I2C OLED Screen Driver DC 3.3V~5V for Arduino

#ad
MakerFocus #ad - Ensure product excellence. Contact us for Better Price for Bulk Orders. High speed switching / high Forward Surge Current Capability / High Temperature Soldering. Pack in a esd bag with main Specs Label, for Long Time Protection and Indetification. Please do not buy shenzhen jinmao electronics co. There is only one module in their packaging, ltd.

We are not authorized to them, please do not be fooled! Please feel free to email us if you have any questions, please look for the MakerFocus brand, we will help you to resolve it asap. All products are tested for stability, consistency and reliability. Plz note: these i2c olED Display Module comes without pin headers.

MakerFocus 2pcs I2C OLED Display Module 0.91 Inch I2C SSD1306 OLED Display Module Blue I2C OLED Screen Driver DC 3.3V~5V for Arduino #ad - The display performance is better than the traditional LCD display, also lower consumption. Iic i2c communications simplifies connections. Use with arduino, esp8266, stm32, esp32, etc; 3.35v power; operating temperature:-40 - 85 ℃; Resolution: 128 x 32. We a strong after-sales service team: as long as you have any questions about the product, we will resolve your issue immediately if received your email, your satisfactory purchase experience is our greatest hope! How to email us? Plz click "MakerFocus" and click "Ask a question" to email us! Looking forward to your consultation!

The power source is automatically selected to the highest voltage source. The keyestudio leonardo is a microcontroller board based on the ATmega32u4.

More information about MakerFocus #ad


Similar products



Cylewet 5Pcs KY-040 Rotary Encoder Module with 15×16.5 mm with Knob Cap for Arduino Pack of 5 CYT1062

#ad
Qianxin #ad - The rotary encoder can count the number of pulse output during rotation in the positive direction and reverse direction through the rotation and this rotation counts are not limited. Pack in a esd bag with main Specs Label, for Long Time Protection and Indetification. Please do not buy shenzhen jinmao electronics co.

There is only one module in their packaging, ltd. We are not authorized to them, please look for the MakerFocus brand, please do not be fooled! Please feel free to email us if you have any questions, we will help you to resolve it asap. Working voltage: 5V; One round number of pulse: 20 . With the key on the rotary encoder, that is, you can reset to the initial state, counting from 0.

Cylewet 5Pcs KY-040 Rotary Encoder Module with 15×16.5 mm with Knob Cap for Arduino Pack of 5 CYT1062 #ad - The material of Knob Cap: aluminium alloy. Plz note: these i2c olED Display Modules come without pin headers. The display performance is better than the traditional LCD display, also lower consumption. Ssd 1306 oled display; i2c oled display, IIC I2C communications simplifies connections;. All products are tested for stability, consistency and reliability.

On-board micro-USB connector for programming. See picture 2-7 for Specifications Datasheet.

More information about Qianxin #ad


Similar products



Cylewet 5Pcs 360 Degree Rotary Encoder Code Switch Digital Potentiometer with Push Button 5 Pins and Knob Cap for Arduino Pack of 5 CYT1100

#ad
Qianxin #ad - On-board micro-USB connector for programming. Atmega 32u4 running at 5V/16MHz. The specification of knob cap: diameter: 15mm/ 059in; height: 16. 5mm/ 065in. 12 x digital I/Os. How to email us? plz click "makerFocus" and click "Ask a question" to email us! Looking for your consultation!128x32 oled display, self-illumination, no need backlight, Display Color: White.

Pack in a esd bag with main Specs Label, for Long Time Protection and Indetification. Please do not buy shenzhen jinmao electronics co. There is only one module in their packaging, ltd. Please look for the makerfocus brand, we are not authorized to them, please do not be fooled! Please feel free to email us if you have any questions, we will help you to resolve it asap.

Cylewet 5Pcs 360 Degree Rotary Encoder Code Switch Digital Potentiometer with Push Button 5 Pins and Knob Cap for Arduino Pack of 5 CYT1100 #ad - Use with arduino, esp32, stm32, esp8266, etc; 3.35v power; operating temperature:-40 - 85 ℃. Oled display, no need backlight, self-illumination, Display Color: Blue.5 pins. Lead-free / rohs compliant Electronics Component / Through Hole Glass. It has everything that diecimila/Duemilanove has electrically with more analog input pins and onboard +5V AREF jumper.

Nano's got the breadboard-ability of the boarduino and the mini+usb with smaller footprint than either, RX, GND on one top, ATN, so users have more breadboard space.

More information about Qianxin #ad


Similar products



HiLetgo MPU9250/6500 9-Axis 9 DOF 16 Bit Gyroscope Acceleration Magnetic Sensor 9-Axis Attitude +Gyro+Accelerator+Magnetometer Sensor Module IIC/SPI for Arduino GY-9250

#ad
HiLetgo 3-01-0876 #ad - See picture 4-5 for Specifications Datasheet. The specification of knob cap: diameter: 15mm/ 059in; height: 16. 5mm/ 065in. 5 pins. Working voltage: 5V; One round number of pulse: 20 Plz note: these i2c olED Display Module comes without pin headers. The display performance is better than the traditional LCD display, also lower consumption.

Iic i2c communications simplifies connections. Use with arduino, esp32, esp8266, stm32, etc; 3.35v power; operating temperature:-40 - 85 ℃; Resolution: 128 x 32. We a strong after-sales service team: as long as you have any questions about the product, we will resolve your issue immediately if received your email, your satisfactory purchase experience is our greatest hope! How to email us? Plz click "MakerFocus" and click "Ask a question" to email us! Looking forward to your consultation!

HiLetgo MPU9250/6500 9-Axis 9 DOF 16 Bit Gyroscope Acceleration Magnetic Sensor 9-Axis Attitude +Gyro+Accelerator+Magnetometer Sensor Module IIC/SPI for Arduino GY-9250 #ad - Power supply: 3-5V internal low dropout regulator. Supported under Arduino IDE v1. 01. Hence, 3-axis accelerometer, the mpu-9250 is a 9-axis MotionTracking device that combines a 3-axis gyroscope, 3-axis magnetometer, and a Digital Motion Processor DMP. Plz note: these i2c olED Display Modules come without pin headers.

The display performance is better than the traditional LCD display, also lower consumption.

More information about HiLetgo 3-01-0876 #ad


Similar products