a Powerful Windows 10 Mini PC 4GB/64GB with Enterprise License – LattePanda

LattePanda DFR0470-ENT - Based on full version windows 10 Professional, Windows 10 Enterprise LTSB is designed for the professional application market. Shipping list: lattepanda 2g/32gb x 1; WiFi Antenna x 1; Printed Safety Precautions x 1. Introduction you are viewing a 4gb ram lattepanda Windows 10 mini PC with 64GB eMMC memory.

Not only can you run normal windows applications such as Office, Hyper-V, Visual Studio and Processing. Via attached advanced tools such as AppLocker, BitLocker, you can also have highest level of security and management capabilities. For more information please refer to the product description, any technical issues after purchase please contact with our tech-support team: [email protected]

a Powerful Windows 10 Mini PC 4GB/64GB with Enterprise License - LattePanda - Com. But wait! a lattepanda also includes an integrated arduino compatible co-processor, or maker, interactive designer, iot developer, using hundreds of mature development platforms such as Johnny Five and Cylon, DIY fanatic, you can easily use it to control and sense the physical world! Whether you are a Windows developer, robotics whizz, a LattePanda single board computer can aid your creative process! SPECIFICATION Intel Cherry Trail Z8350 Quad Core Processor Base Frequency: 1.

44ghz 1. 92ghz burst frequency operating system: windows 10 enterprise ltsb x64 with activate key ram: 4gb DDR3L Storage Capacity: 64GB GPU: Intel HD Graphics, 12 EUs @200-500Mhz, single-channel memory USB 3. 0 x 1, usb 2. 0 x 2 wi-fi 802.

More information about LattePanda DFR0470-ENT

LattePanda 7-inch 1024x600 IPS Display

LattePanda FIT0477 - Compatible LattePanda display connector, no external power supply. Specification 7 inch ips display 1024*600 high resolution Dimension: 164. 0mm x 96. 0mm x 2. 6mm supports lattepanda 10cm fpc extension cable shipping list 7-inch 1024x600 IPS Display X1 The 7 inch ips lcd monitor with high resolution of 1024*600 pixels.

The border of the display is insulated with black tape so that even without and enclosure there is no possibility of a short-circuit. Ultra-narrow frame 2mm thickness, easy to embed design. Note: not compatible with LattePanda Alpha and Delta edition. Introduction lattepanda 7 inch screen, perfect visual experience with IPS screen technology and 1024 * 600 high resolution, easy to install.

LattePanda 7-inch 1024x600 IPS Display - All you need to do is power your lattePanda board and you have a visual user interface for your project, such as AIO, infotainment systems and embedded projects. Note: not compatible with LattePanda Alpha and Delta edition. Compatible with the official touch screen. Ips screen features the wide visual Angle, fast response speed and accurate color rendition.

More information about LattePanda FIT0477


Similar products



MakerFocus Aluminum Alloy CNC Case Enclose with Lattepanda Cup Super Mute Cooling Fan with Heat Sink Set for Lattepanda

Makerfocus - Super-mute cooling fan with heat sink; For the installation guide, please refer to: http://www. Raspberrypiwiki. Com/index. Php/lattePanda_board_Alu-Case. Ultra-narrow frame 2mm thickness, easy to embed design. The 2-pin jumper wire makes it easily to connect with the CN2 headers on the board. This fan is low noise and has a thermal pad on the back that can stick on the metal shield on the board.

With its aluminum casing, heat from CPU will be absorbed fast, giving you better performance. Compatible LattePanda display connector, no external power supply. Ips screen features the wide visual Angle, fast response speed and accurate color rendition. The 2-pin jumper wire makes it easily to connect with the CN2 headers on the board.

MakerFocus Aluminum Alloy CNC Case Enclose with Lattepanda Cup Super Mute Cooling Fan with Heat Sink Set for Lattepanda - Is your lattepanda running hot and throttling? This heat sink and fan combo will cool the CPU for smooth performance. The fan keeps the unit running at a stable temperature. Compatible with the official touch screen. Note: not compatible with LattePanda Alpha and Delta edition. With light pipe; support cooling fan; This fan is low noise and has a thermal pad on the back that can stick on the metal shield on the board.

Cnc machining and manufacturing;Anodic oxidation surface treatment process.

More information about Makerfocus


Similar products



7-inch Capacitive Touch Panel Overlay for LattePanda Display

LattePanda FIT0478 - Please note: 1. Install. Bat" must be run as an administrator to update the driver correctly. 2. If you have purchased an older version LattePanda but want to use the newer capacitive touch panel, you can download the V1. 1 drivers at LattePanda official github and manually install them. Compatible with the official touch screen.

Specification capacitive touch control transmittance:>85% surface hardness: 6h response Time: ≤16ms Tapping Durability: 200, 000, 000 times Supports LattePanda 10cm FPC Extension Cable Dimensions: 164. 0mm x 96. 0mm shipping list 7-inch capacitive touch panel overlay x1 The 7 inch ips lcd monitor with high resolution of 1024*600 pixels.

7-inch Capacitive Touch Panel Overlay for LattePanda Display - Compatible LattePanda display connector, no external power supply. Note: not compatible with LattePanda Alpha and Delta edition. With light pipe; support cooling fan; This fan is low noise and has a thermal pad on the back that can stick on the metal shield on the board. Cnc machining and manufacturing;Anodic oxidation surface treatment process.

Compatible with official 7-inch LCD display, Note: NOT Compatible with LattePanda Alpha and Delta edition. Pre-installed drivers, plug and play, easy to install. Super-mute cooling fan with heat sink; For the installation guide, please refer to: http://www.

More information about LattePanda FIT0478


Similar products



Aluminum Alloy Case for LattePanda - with a Cooling Fan as Gift

DFRobot FIT0530 - The inner space is enough to mount cooling fan the total thickness of fan should be less than 7. 7mm. The inner space is enough to mount cooling fan the total thickness of fan should be less than 7. 7mm. It adopts to cnc machining and manufacturing, anodic oxidation surface treatment process. Ultra-narrow frame 2mm thickness, easy to embed design.

And the vent and connection hole are all reserved to mount touch panel, display and cooling fan. Worth to buy from DFRobot Store! Super-mute cooling fan with heat sink; For the installation guide, please refer to: http://www. Raspberrypiwiki. Com/index. Php/lattePanda_board_Alu-Case. Is your lattepanda running hot and throttling? This heat sink and fan combo will cool the CPU for smooth performance.

Aluminum Alloy Case for LattePanda - with a Cooling Fan as Gift - The fan keeps the unit running at a stable temperature. Ips screen features the wide visual Angle, fast response speed and accurate color rendition. Lattepanda is a complete windows 10 single board computer. The 2-pin jumper wire makes it easily to connect with the CN2 headers on the board.

More information about DFRobot FIT0530


Similar products



Pure Copper Heatsink Pack for LattePanda 5 pcs

LattePanda FIT0506 - Note: not compatible with LattePanda Alpha and Delta edition. With light pipe; support cooling fan; This fan is low noise and has a thermal pad on the back that can stick on the metal shield on the board. Cnc machining and manufacturing;Anodic oxidation surface treatment process. The 2-pin jumper wire makes it easily to connect with the CN2 headers on the board.

Lattepanda 7-inch touch panel overlay uses capacitive touch technology and multi-touch to bring you a truly interactive experience. Introduction this tiny little orange heatsink is a perfect solution for cooling off small surface-mount components such as stepper motor drivers, CPUs on LattePanda or a similar mini PC.

Pure Copper Heatsink Pack for LattePanda 5 pcs - Compatible with the official touch screen. Super-mute cooling fan with heat sink; For the installation guide, please refer to: http://www. Raspberrypiwiki. Com/index. Php/lattePanda_board_Alu-Case. A total of 5 pieces in this pack can cover all heat sources to ensure your LattePanda working at a stable temperature.

Ultra-narrow frame 2mm thickness, easy to embed design. It is made of pure copper to increase heat dissipation and transfer for your machine running cooler in summer.

More information about LattePanda FIT0506


Similar products



LattePanda Starter Kit American Power Adapter

LattePanda KIT0116 - Ultra-narrow frame 2mm thickness, easy to embed design. Any technical issues after purchase please contact with our tech-support team: [email protected] Com. Heatsinks: cover all heat sources, help cooling the LattePanda. The 2-pin jumper wire makes it easily to connect with the CN2 headers on the board.

Lattepanda 7-inch touch panel overlay uses capacitive touch technology and multi-touch to bring you a truly interactive experience. A total of 5 pieces in this pack can cover all heat sources to ensure your LattePanda working at a stable temperature. Easy to use with 2-Pin jumper wire. It is made of pure copper to increase heat dissipation and transfer for your machine running cooler in summer.

LattePanda Starter Kit American Power Adapter - It has everything a regular PC has and can do anything that a regular PC does. And the vent and connection hole are all reserved to mount touch panel, display and cooling fan. Worth to buy from DFRobot Store! The inner space is enough to mount cooling fan the total thickness of fan should be less than 7. 7mm.

Simply overlay the panel on your lattepanda 7-inch display, and you will have a high-quality user interface that you can use to create all-in-one, power the board, integrated projects. Capacitive touch technology, supports 5-finger touch inputs.

More information about LattePanda KIT0116


Similar products



Geekworm Aluminum Alloy CNC Case for LattePanda V1.0 / Geekworm Enclose with Cup Super Mute Cooling Fan Kit for Latte Panda Mother Board

Geekworm TB-467311 - Super-mute cooling fan with heat sink; For the installation guide, please refer to: http://www. Raspberrypiwiki. Com/index. Php/lattePanda_board_Alu-Case. Ultra-narrow frame 2mm thickness, easy to embed design. For the installation guide, please refer to: http://www. Raspberrypiwiki. Com/index. Php/lattePanda_board_Alu-Case.

This tiny little orange heatsink is a perfect solution for cooling off small surface-mount components such as stepper motor drivers, CPUs on LattePanda or a similar mini PC. This is a starter kit for lattepanda that includes a power adapter, 5 heatsinks, an usb cable, a cooling fan, a HDMI cable and an acrylic case.

Geekworm Aluminum Alloy CNC Case for LattePanda V1.0 / Geekworm Enclose with Cup Super Mute Cooling Fan Kit for Latte Panda Mother Board - Power supply: the high-quality supply to power up your LattePanda with a stable 5V power that won't vary or sag. Cooling fan: low noise and has a thermal pad on the back that can stick on the metal shield on the board. Heatsinks: cover all heat sources, help cooling the LattePanda. Lattepanda is a complete windows 10 single board computer.

This tiny little orange heatsink is a perfect solution for cooling LattePanda. The inner space is enough to mount cooling fan the total thickness of fan should be less than 7. 7mm.

More information about Geekworm TB-467311


Similar products



Compatible with Cooling Fan - Acrylic Case for LattePanda

DFRobot FIT0474 - For the installation guide, please refer to: http://www. Raspberrypiwiki. Com/index. Php/lattePanda_board_Alu-Case. Easy to use with 2-Pin jumper wire. This tiny little orange heatsink is a perfect solution for cooling LattePanda. Compatible with official 7-inch LCD display, Note: NOT Compatible with LattePanda Alpha and Delta edition.

Pre-installed drivers, plug and play, easy to install. It is made of pure copper to increase heat dissipation and transfer for your machine running cooler in summer. It has everything a regular PC has and can do anything that a regular PC does. The inner space is enough to mount cooling fan the total thickness of fan should be less than 7.

Compatible with Cooling Fan - Acrylic Case for LattePanda - 7mm. Specification lattepanda 2g/32gb 4g/64gb compatible Material: Acrylic/PMMA Dimension: 3. 78x2. 99x1. 42 inches assembled weight: 124 g shipping list acrylic parts x2 Assembly Instructions x1 The 7 inch ips lcd monitor with high resolution of 1024*600 pixels. Note: not compatible with LattePanda Alpha and Delta edition.

With light pipe; support cooling fan; This fan is low noise and has a thermal pad on the back that can stick on the metal shield on the board. Cnc machining and manufacturing;Anodic oxidation surface treatment process.

More information about DFRobot FIT0474


Similar products



Silicone Case LattePanda

DFRobot FIT0516 - This tiny little orange heatsink is a perfect solution for cooling off small surface-mount components such as stepper motor drivers, CPUs on LattePanda or a similar mini PC. Note: not compatible with LattePanda Alpha and Delta edition. With light pipe; support cooling fan; This fan is low noise and has a thermal pad on the back that can stick on the metal shield on the board.

Cnc machining and manufacturing;Anodic oxidation surface treatment process. It is compatible with almost every gadget you know: printers, joysticks, cameras and more. Easy access slots for usb, hdmi, GPIO cables, sd card, complete with etched labels Accommodates cooling fan. Open source design drawings for easy customization.

Silicone Case LattePanda - Worth to buy from DFRobot Store! Enclosure: a nice and solid clear enclosure for LattePanda, keep the dust out and prevent short circuit. A simple and effective way to make the LattePanda cool! Introduction this silicone case is specifically designed for LattePanda development board. Ips screen features the wide visual Angle, fast response speed and accurate color rendition.

Compatible LattePanda display connector, no external power supply. Lattepanda is a complete windows 10 single board computer.

More information about DFRobot FIT0516


Similar products



2.4GHz 6dBi Antenna with IPEX Connector for LattePanda

LattePanda FIT0505 - Super-mute cooling fan with heat sink; For the installation guide, please refer to: http://www. Raspberrypiwiki. Com/index. Php/lattePanda_board_Alu-Case. Its 6dbi high gain makes for better signal reception and transmission. These heatsinks will also fit perfectly inside acrylic LattePanda case. A simple and effective way to make the LattePanda cool!

Ultra-narrow frame 2mm thickness, easy to embed design. Compatible with the official touch screen. Its construction takes inspiration from traditional Chinese wood craft to ensure functionality and a neat design aesthetic. A total of 5 pieces in this pack can cover all heat sources to ensure your LattePanda working at a stable temperature.

2.4GHz 6dBi Antenna with IPEX Connector for LattePanda - Enclosure: a nice and solid clear enclosure for LattePanda, keep the dust out and prevent short circuit. The inner space is enough to mount cooling fan the total thickness of fan should be less than 7. 7mm. This tiny little orange heatsink is a perfect solution for cooling LattePanda. Compatible with official 7-inch LCD display, Note: NOT Compatible with LattePanda Alpha and Delta edition.

Pre-installed drivers, plug and play, easy to install. This is a starter kit for lattepanda that includes a power adapter, an usb cable, a cooling fan, 5 heatsinks, a HDMI cable and an acrylic case.

More information about LattePanda FIT0505


Similar products